Tag Archives: screw free

China Good quality CHINAMFG 200kw Oil Free Water Lubricated Air Compressor Screw Air-Compressor Kompresor small air compressor

Product Description

1.Atals-Copco Air-End
Atlas-Copco Group 149years air-end research & development experience.

2.High Efficiency & Save Energy
High efficiency & energy saving intake valve,keep in lower unloading pressure and avoid large energy consumption when

3.Easy Installation & Operation
Compressor is filled with inbrication oil before delivering. You can operate it after installing and power on.

4.Low noise & low vibration
Atlas-copco air-end, low noise & vibration.

5.Reliability & Safety
Reliability bigger cooler, lower operating temperature.

Detailed Photos

Product Parameters

LSW-8A PM-8	8	116	0.5~1.1	10	7.5	510	Air Cooled	Belt Driven	57±2	G3/4”	—	—	8008001200
LSW-8A PM-10	10	145	0.4~0.9
LSW-11A PM-8	8	116	0.7~1.7	15	11	620	Air Cooled	Direct Driven	60±2	G3/4”	—	—	12008551335
LSW-11A PM-10	10	145	0.6~1.4
LSW-15A PM-8	8	116	1.0~2.3	20	15	670	Air Cooled	Direct Driven	60±2	G3/4”	—	—	12008551335
LSW-15A PM-10	10	145	0.9~2.0
LSW-18.5A PM-8	8	116	1.2~3.0	25	18.5	730	Air Cooled	Direct Driven	63±2	G1”	—	—	140015711340
LSW-18.5A PM-10	10	145	1.0~2.6
LSW-22A PM-8	8	116	1.5~3.6	30	22	780	Air Cooled	Direct Driven	63±2	G1”	—	—	140015711340
LSW-22A PM-10	10	145	1.3~3.0
LSW-30A PM -8	8	116	2.1~5.1	40	30	1150	Air Cooled	Direct Driven	66±2	G1-1/4”	—	—	165011801505
LSW-30A PM-10	10	145	1.8~4.3
LSW-37A PM-8	8	116	2.6~6.4	50	37	1200	Air Cooled	Direct Driven	66±2	G1-1/4”	—	—	165011801505
LSW-37A PM-10	10	145	2.2~5.4
LSW-45W PM-8	8	116	3.3~8.2	60	45	1490	Water Cooled	Direct Driven	68±2	G2”	G1-1/2”	10	180013601670
LSW-45W PM-10	10	145	2.8~7.0
LSW-55W PM-8	8	116	4.0~10	75	55	1570	Water Cooled	Direct Driven	69±2	G2”	G1-1/2”	12	180013601670
LSW-55W PM-10	10	145	3.4~8.5
LSW-75W PM-8	8	116	5.2~13.0	75	55	1750	Water Cooled	Direct Driven	69±2	G2”	G1-1/2”	18	180013601670
LSW-75W PM-10	10	145	4.4~11.1
LSW-90W PM-8	8	116	6.9~17.2	120	90	2450	Water Cooled	Direct Driven	73±2	G2-1/2”	G1-1/2”	20	220015501800
LSW-90W PM-10	10	145	5.9~14.6
LSW-110W PM-8	8	116	8.2~20.3	150	110	2580	Water Cooled	Direct Driven	75±2	G2-1/2”	G2”	24	220015501800
LSW-110W PM-10	10	145	7.0~17.3
LSW-132W PM-8	8	116	9.7~24.1	180	132	2700	Water Cooled	Direct Driven	75±2	G2-1/2”	G2”	30	270015501800
LSW-132W PM-10	10	145	8.2~20.5
LSW-160W PM-8	8	116	11.3~28.2	210	160	3900	Water Cooled	Direct Driven	77±2	G3”	G3”	35	300018002100
LSW-160W PM-10	10	145	9.6~24.0
LSW-185W PM-8	8	116	12.9~32.1	240	185	4050	Water Cooled	Direct Driven	77±2	G3”	G3”	38	300018002100
LSV180W PM-10	10	145	11.0~27.3
LSW-200W PM-8	8	116	13.8~34.5	270	200	4200	Water Cooled	Direct Driven	78±2	G4”	G4”	42	300018002100
LSW-200W PM-10	10	145	11.7~29.3
LSW-220W PM-8	8	116	15.5~38.6	295	220	4400	Water Cooled	Direct Driven	79±2	G4”	G4”	47	310018502100
LSW-220W PM-10	10	145	13.2~32.8
LSW-250W PM-8	8	116	17.1~42.6	340	250	4800	Water Cooled	Direct Driven	79±2	G4”	G4”	53	310018502100
LSW-250W PM-10	10	145	14.5~36.2

Company Profile

FAQ

Q1: Are you a manufacturer or trading company?
A1: Xihu (West Lake) Dis.in is professional screw air compressor factory located in HangZhou, China, CHINAMFG is Xihu (West Lake) Dis.in overseas market sales representative.

Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.

Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.

Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.

Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory.

Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.

Q7: What’s the Min. Order requirement?
A7: 1unit

Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Water Cooling
Power Source:	AC Power
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Single Screw Compressor

Samples:	US$ 80517/unit 1 unit(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What Are the Key Components of a Water-Lubrication System in Compressors?

A water-lubrication system in compressors typically consists of several key components that work together to provide lubrication and cooling to the compressor. Here’s a detailed explanation of the key components of a water-lubrication system in compressors:

Water Supply:

Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

Regular maintenance, inspection, and monitoring of the key components of the water-lubrication system are essential to ensure its proper functioning and to prevent any issues that could affect the performance and longevity of the compressor.

air compressor

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

When encountering common problems with water-lubrication systems, it is essential to follow a systematic troubleshooting approach. Here’s a detailed explanation of the steps involved in troubleshooting common issues with water-lubrication systems:

Step 1: Identify the Problem:

The first step is to identify the specific problem or symptom that is affecting the water-lubrication system. Common problems may include inadequate lubrication, water leaks, abnormal noises, or reduced system performance. Understanding the specific issue will help in determining the appropriate troubleshooting steps.

Step 2: Check Water Supply:

Verify that there is a proper water supply to the system. Ensure that the water source is connected and flowing adequately. Check for any obstructions or restrictions in the water lines that may be affecting the water flow to the lubrication system.

Step 3: Inspect Water Filters and Strainers:

Water filters and strainers are used in water-lubrication systems to remove debris and impurities from the water. Inspect these filters and strainers for clogs or blockages that may be hindering the water flow. Clean or replace the filters as necessary to ensure proper water filtration.

Step 4: Verify Water Pressure:

Check the water pressure within the system to ensure it falls within the recommended range. Low water pressure can result in inadequate lubrication, while high water pressure can cause leaks or damage to the system. Use a pressure gauge to measure the water pressure and adjust it if necessary according to the manufacturer’s guidelines.

Step 5: Examine Water-Lubrication Components:

Closely inspect the various components of the water-lubrication system, including the water pump, distribution lines, lubrication points, and seals. Look for signs of wear, damage, or misalignment that may be contributing to the problem. Tighten loose connections and replace any damaged or worn-out components as needed.

Step 6: Check for Air in the System:

Air trapped within the water-lubrication system can affect its performance. Bleed the system to remove any trapped air. Follow the manufacturer’s instructions for bleeding air from the system, which typically involves opening specific valves or vents until a steady flow of water is achieved.

Step 7: Inspect Cooling Mechanisms:

Water-lubrication systems often incorporate cooling mechanisms, such as heat exchangers or radiators, to dissipate excess heat. Inspect these cooling components for blockages, corrosion, or leaks that may be compromising their effectiveness. Clean or repair the cooling mechanisms as necessary to ensure proper heat dissipation.

Step 8: Consult Manufacturer Documentation:

If the troubleshooting steps above do not resolve the problem, refer to the manufacturer’s documentation, such as the user manual or technical specifications. These resources may provide specific troubleshooting guidelines, diagnostics, or additional maintenance procedures for the water-lubrication system.

Step 9: Seek Professional Assistance:

If the problem persists or if the troubleshooting steps are beyond your expertise, it is advisable to seek professional assistance. Contact the manufacturer’s technical support or consult a qualified technician with experience in water-lubrication systems. They can provide expert guidance and assistance in resolving complex issues.

By following these troubleshooting steps, you can effectively identify and address common problems encountered in water-lubrication systems, ensuring optimal performance and reliability.

air compressor

Advantages of Using Water as a Lubricant in Air Compressors

Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:

Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.

Overall, using water as a lubricant in air compressors can offer significant advantages in terms of cost-effectiveness, environmental friendliness, heat dissipation, fire safety, and maintenance requirements.

China Good quality CHINAMFG 200kw Oil Free Water Lubricated Air Compressor Screw Air-Compressor Kompresor small air compressor
editor by CX 2024-05-22

China Standard Best Price 7.5kw-30kw 100-232psi Oil Free Factory Mining Magnet Silent Rotary Screw Type Air Compressor with Ghh/Gu/Alloy/Baosi-Win Air End for Industrial mini air compressor

Product Description

Brief Introduction:
Air end: German Technology. 30 years designed lifetime.
Motor: 100% rare earth permanent magnet motor.
Inverter: Chinese No. 1 inverter can save 30% energy.
Warranty: 5 years for the air end, and 2 years for the whole compressor.
Delivery time: 7-15 days.
After-sales service:we have our professional after-sales technician to instruct the installation of the whole screw air compressor.
We offer free pipe and valves for installation and installation diagram

Porduct Advantages

1. Air end of screw air compressor
The air end is with state-of-the art screw element and 4 -6 SKF bearings to make sure it plenty of air output and longer lifetime.
2.Electric Motor of the air compressor
Name brand qualified IP54 ,F insulation, IE2 , IE3 motor , high efficiency and energy saving.
3. Intake valve of the screw air compressor
High efficiency intake valve protects the compressor components by removing 99% dirty particles down to 3 microns.
4. Oil Air separator
High efficiency separating for oil and air and low oil content in the compressed air.
5. Touch Screen Controller.
6. High efficient Centrifugal fan can give best cooling for screw compressor.
7.Dust proof mesh to protect electrical control system

Detailed Photos

Product Parameters

Model	Air Flow (m³/min)				Motor Power	Noise	Outlet Diameter	Dimension	Weight
Model	7bar	8bar	10bar	13bar	kw	dB	inch	*WDH (mm)*	kg
YV-10A	1.1	1.0	0.85	0.7	7.5	65	G1”	960680960	280
YV-15A	1.8	1.65	1.5	1.3	11	65	G1”	10508301240	380
YV-20A	2.4	2.2	2.1	1.8	15	68	G1”	10508301240	380
YV-25A	3.1	3.0	2.7	2.3	18.5	68	G1”	12008301290	480
YV-30A	3.8	3.6	3.2	2.5	22	68	G1”	12008301290	480
YV-40A	5.3	5.0	4.3	3.6	30	69	G11/2”	130010001540	710
YV-50A	6.6	6.2	5.7	4.6	37	69	G11/2”	130010001540	710
YV-60A	8.0	7.7	6.9	6.0	45	70	G11/2”	150011601700	990
YV-75A	10.5	9.8	8.7	7.3	55	70	G11/2”	150011601700	990
YV-100A	13.6	13.0	11.3	10.1	75	72	G2”	170011801800	1300
YV-125A	16.2	15.4	13.2	11.2	90	72	DN50	185012001900	1400
YV-150A	20.8	19.5	16.5	13.7	110	73	DN65	225012602055	1560
Remarks:
1. working ambinent temperature: -5ºC-45ºC;
2. exhausting air temperature ≤ working ambinent temperature +10ºC-15ºC;
3. starting mode: Y-△;
4. exhausting oil content: <3ppm;
5. certificate: CE/ISO9001/ASME;
6. voltage: 380V/220V/400V/440V/415V

Certifications

Our Certificates:
1. CE;
2. SGS;
3. ISO9001;
4. 12 patents for screw compressor.
Re-factory quality control process:
1.Installation inspection of the whole air compressor: check and confirm the whole machine according to the operation instructions and quality control standards. Main inspection items:
A . Confirm the nose and motor nameplates;
B . Check whether there is oil leakage in the pipeline and oil circuit of the air compressor; C . the air compressor machine screw locking inspection..
2. Rotary screw type air compressor factory test machine, heat engine: test whether the air compressor operation parameters meet the requirements of customers, including voltage, current, working pressure, exhaust volume, etc.Air compressor factory before 48 hours of thermal test, stability confirmation.
3. 24 hours online after-sales service, one-to-1 online guidance installation, debugging, troubleshooting.

Product Case

Use case of rotary screw type air compressor
1. Rotary Screw type air compressors are exported to 132 countries and regions all over the world;
2. All indicators of screw air compressor are stable and the failure rate is low;
3. Perfect after-sales service system, engineers on duty 24 hours a day to provide one-on-1 service to customers at the air compressor use site.
Rotary Screw type Air compressor packing method
1. Screw air compressor packaging is divided into 3 layers from inside to outside:
1) The first layer of protection: spray paint on the surface of the machine to protect the surface of the machine. The fouling pull film is wrapped around the surface of the machine to protect the surface of the paint.
2) The second layer of protection: anti-collision protection of the machine. On the basis of lacquer protection, anti-collision buffer cotton is used to protect the machine against collision.
3) The third layer of protection: the case adopts the overall packaging of the non-fumigation wooden case to protect the machine during transportation.

F.A.Q
Q1. Why do customers choose us?
Yunshun Electric Machinery Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our German Standard production line helps us get the affirmation from our agents as well as end-user clients.

Q2. Are you a manufacturer or trading company?
We are a professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be accepted.

Q3. What’s your delivery time?
Generally 7-10 days, if urgent order, we can arrange, too.

Q4. How long is your air compressor warranty?
2 year for the whole machine and 5years for screw air end, except consumable spare parts.

Q5. How long could your air compressor be used for?
At least 10 years.

Q6. What’s payment term?
T/T, L/C, Western Union, Credit Card, and etc.

Q7. How about your customer service?
24 hours on-line service for all our clients.

Q8. How about your after-sales service?
1. Providing customers with installation online instructions.
2. Well-trained engineers available to overseas service.
3. PlHangZhou for oversea after-sales supporting company.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	5 Years for The Air End, and 2 Years for The Whole
Warranty:	2 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What Is the Role of Water Separators in Water-Lubricated Compressors?

In water-lubricated compressors, water separators play a crucial role in maintaining the integrity and performance of the compressed air system. Here’s a detailed explanation of their role:

Water separators, also known as moisture separators or condensate separators, are components within the compressed air system that are specifically designed to remove water or moisture from the compressed air stream. They help ensure that the compressed air remains dry and free from excessive moisture, which can cause various issues in the system and downstream equipment.

The primary role of water separators in water-lubricated compressors is to separate and remove water that is present in the compressed air due to the compression process and condensation. Here’s how they accomplish this:

Condensate Separation: During the compression of air, moisture present in the air is compressed along with the air molecules. As the compressed air cools down after the compression stage, the moisture condenses into liquid form. Water separators are designed to efficiently separate this condensate from the compressed air stream, preventing it from entering downstream equipment, pipelines, or end-use applications.
Gravity and Centrifugal Separation: Water separators utilize various separation principles to separate the condensate from the compressed air. Gravity-based separators rely on the difference in density between the water droplets and the compressed air to allow the water to settle at the bottom of the separator, where it can be drained out. Centrifugal separators use centrifugal force to spin the air and water mixture, causing the water droplets to be thrown outwards and collected in a separate chamber.
Coalescing and Filtration: Water separators often incorporate coalescing and filtration mechanisms to enhance their efficiency. Coalescing filters are used to capture and merge small water droplets into larger droplets, making it easier for the separator to separate them from the compressed air. Filtration elements, such as fine mesh or media, may be incorporated to remove any remaining water droplets or particulate matter that could potentially pass through the separator.
Automatic Drainage: To ensure continuous and efficient operation, water separators are equipped with automatic drain valves. These valves periodically or on demand, expel the collected condensate from the separator. Automatic drainage prevents the accumulation of water in the separator, which can lead to reduced separation efficiency, increased pressure drop, and potential damage to downstream equipment.

By effectively removing water and moisture from the compressed air stream, water separators help prevent issues such as corrosion, clogging, freezing, and degradation of pneumatic equipment and processes. They contribute to maintaining the quality and reliability of the compressed air system while protecting downstream components and applications from the negative effects of moisture.

It is important to note that proper sizing, installation, and maintenance of water separators are essential to ensure their optimal performance. Regular inspection and maintenance of the separators, including draining the collected condensate, replacing filtration elements, and checking for any leaks or malfunctions, are necessary to ensure the efficient operation of water-lubricated compressors and the overall compressed air system.

air compressor

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

When selecting between water-lubricated and oil-lubricated compressors, several considerations come into play. Here’s a detailed explanation of the key factors to consider when choosing between these two types:

Operating Environment:

Water Sensitivity: Water-lubricated compressors are well-suited for environments where water is readily available and can be easily supplied to the compressor system. On the other hand, oil-lubricated compressors are more suitable for applications where water is not readily available or where water contamination could pose a problem.
Cleanliness Requirements: If the application demands a high level of cleanliness, such as in certain manufacturing processes or cleanroom environments, water-lubricated compressors may be preferred. Water is inherently cleaner than oil and reduces the risk of oil contamination in sensitive operations.

Maintenance and Service:

Lubricant Replacement: Oil-lubricated compressors require regular oil changes and maintenance to ensure proper lubrication and performance. Water-lubricated compressors, on the other hand, eliminate the need for oil changes and associated maintenance tasks, simplifying the maintenance requirements.
Oil Contamination: Oil-lubricated compressors carry the risk of oil contamination in the compressed air system. This can be a concern in certain applications where oil contamination can negatively impact product quality or downstream equipment. Water-lubricated compressors reduce the risk of oil contamination, making them advantageous in such applications.

Environmental Impact:

Oil Disposal: Oil-lubricated compressors generate used oil that requires proper disposal in accordance with environmental regulations. Water-lubricated compressors eliminate the need for oil disposal, contributing to a reduced environmental impact.
Energy Efficiency: In terms of energy efficiency, water-lubricated compressors tend to have an advantage. Water has a higher specific heat capacity than oil, meaning it can absorb and dissipate heat more effectively. This can result in improved cooling efficiency and potentially lower energy consumption compared to oil-lubricated compressors.

Application-Specific Factors:

Operating Pressure: Water-lubricated compressors are generally suitable for lower to moderate operating pressures. Oil-lubricated compressors, on the other hand, can handle higher operating pressures, making them more appropriate for applications that require higher pressure levels.
Temperature Sensitivity: Water-lubricated compressors may have limitations in applications where low temperatures are encountered. Water freezing or becoming slushy can cause operational issues. Oil-lubricated compressors, with appropriate low-temperature oil formulations, can better handle such temperature-sensitive conditions.

Cost Considerations:

Initial Cost: Water-lubricated compressors generally have a lower initial cost compared to oil-lubricated compressors. This cost advantage can be attractive for applications with budget constraints.
Maintenance Cost: Over the long term, water-lubricated compressors may have lower maintenance costs due to the elimination of oil changes and associated maintenance tasks. However, it’s important to consider the specific maintenance requirements and costs associated with each type of compressor.

By considering these factors, including the operating environment, maintenance and service requirements, environmental impact, application-specific factors, and cost considerations, one can make an informed decision when choosing between water-lubricated and oil-lubricated compressors.

air compressor

Are There Any Downsides to Using Water-Lubricated Air Compressors?

While water-lubricated air compressors offer several advantages, there are also some downsides to consider when using this type of compressor. Here are a few potential drawbacks associated with water-lubricated air compressors:

Water quality requirements: Water-lubricated compressors are highly dependent on the quality of the water used for lubrication. The water should be free from contaminants, minerals, and impurities that can affect the compressor’s performance or cause corrosion. Ensuring the consistent availability of high-quality water may require additional filtration or treatment processes, which can add complexity and cost to the system.
Increased maintenance: Compared to oil-lubricated compressors, water-lubricated models may require more frequent maintenance. Regular checks, cleaning, and monitoring of the water system are necessary to prevent blockages, maintain proper water flow, and ensure the cleanliness of the compressor. This increased maintenance requirement can result in higher operational costs and more downtime for maintenance activities.
Potential for corrosion: While water itself is not corrosive, certain water conditions, such as high mineral content or low pH levels, can promote corrosion within the compressor system. Corrosion can lead to component damage, reduced efficiency, and the need for repairs or replacements. Implementing corrosion prevention measures, such as water treatment or the use of corrosion-resistant materials, may be necessary to mitigate this risk.
Compatibility limitations: Water-lubricated compressors may have limitations when it comes to compatibility with certain materials or gases. For example, in applications where the compressed air comes into contact with sensitive materials or requires specific gas purity, the use of water as a lubricant may not be suitable. In such cases, alternative lubrication methods or compressor types may be more appropriate.
Environmental considerations: While water is generally considered environmentally friendly, the disposal of used water from the compressor system may require proper wastewater management. Depending on local regulations and requirements, additional steps may be needed to ensure compliant and environmentally responsible disposal of the water used for lubrication.

Despite these potential downsides, water-lubricated air compressors continue to be used in various industries and applications due to their specific advantages and suitability for certain environments. It is important to carefully evaluate the specific requirements, operating conditions, and maintenance considerations of a given application to determine whether a water-lubricated compressor is the most suitable choice.

China Standard Best Price 7.5kw-30kw 100-232psi Oil Free Factory Mining Magnet Silent Rotary Screw Type Air Compressor with Ghh/Gu/Alloy/Baosi-Win Air End for Industrial mini air compressor
editor by CX 2024-05-17

China supplier Dww-45 10 Bar 6 Cubic Meter/Min Oil Free Screw Air Compressor For Large Industry air compressor lowes

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

1.Clean air 1, China
Our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling and Water Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

Water-lubricated air compressors can have an impact on the quality of the compressed air they produce. Here’s a detailed explanation of how water-lubricated air compressors can affect compressed air quality:

Moisture Content:

Condensation: Water-lubricated compressors introduce moisture into the compressed air system. During the compression process, as the air cools downstream, moisture can condense and accumulate. This moisture can lead to issues such as corrosion, rust, and contamination of downstream equipment or processes.
Water Carryover: If the compressor’s water separation mechanisms are not efficient or if there are malfunctions in the water removal systems, water droplets or mist may carry over into the compressed air. This can negatively impact the quality of the compressed air and introduce moisture-related issues downstream.

Contamination:

Oil Contamination: In some water-lubricated compressors, there is a potential for oil to mix with the water used for lubrication. If oil and water emulsify or if there are leaks in the compressor system, oil contamination may occur. Oil-contaminated compressed air can have adverse effects on downstream processes, equipment, and products. It can lead to contamination, reduced performance of pneumatic components, and potential health and safety concerns.
Particulate Contamination: Water-lubricated compressors can introduce particulate matter, such as sediment, debris, or rust, into the compressed air system. This can occur if the water supply or water treatment systems are not adequately filtered or maintained. Particulate contamination can clog or damage pneumatic equipment, affect product quality, and cause operational issues in downstream applications.

Preventive Measures:

Water Separation: Water-lubricated compressors employ various water separation mechanisms to remove moisture from the compressed air. This includes moisture separators, water traps, or coalescing filters that are specifically designed to capture and remove water droplets or mist from the compressed air stream. Regular maintenance and inspection of these separation systems are necessary to ensure their proper functioning.
Air Treatment: Additional air treatment components, such as air dryers or desiccant systems, can be installed downstream of water-lubricated compressors to further reduce moisture content in the compressed air. These systems help to remove moisture that may have carried over from the compressor and ensure that the compressed air meets the required dryness standards for specific applications.
Proper Maintenance: Regular maintenance of water-lubricated compressors is essential to minimize the potential impact on compressed air quality. This includes routine inspection, cleaning, and replacement of filters, lubrication systems, and water separation components. Addressing any leaks, malfunctioning components, or system issues promptly can help maintain the integrity of the compressed air and prevent contamination or excessive moisture levels.

By implementing appropriate water separation mechanisms, air treatment systems, and maintenance practices, the impact of water-lubricated air compressors on compressed air quality can be minimized. It is important to consider the specific requirements of the application and follow industry standards and guidelines to ensure the desired compressed air quality is achieved.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

What Maintenance Is Required for Water-Lubricated Air Compressors?

Maintaining water-lubricated air compressors involves several key maintenance tasks to ensure their optimal performance and longevity. Here are the maintenance requirements typically associated with water-lubricated air compressors:

Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.

Regular and proactive maintenance of water-lubricated air compressors helps ensure their reliable operation, extends their lifespan, and minimizes the risk of performance issues or component failures. It is advisable to consult the compressor’s documentation and seek guidance from the manufacturer or a qualified technician to establish a comprehensive maintenance routine specific to the equipment.

China supplier Dww-45 10 Bar 6 Cubic Meter/Min Oil Free Screw Air Compressor For Large Industry air compressor lowes
editor by CX 2024-05-16

China Hot selling CHINAMFG 200kw Screw Type Single Oil Free Dental Air Compressor air compressor price

Product Description

1.Atals-Copco Air-End
Atlas-Copco Group 149years air-end research & development experience.

2.High Efficiency & Save Energy
High efficiency & energy saving intake valve,keep in lower unloading pressure and avoid large energy consumption when

3.Easy Installation & Operation
Compressor is filled with inbrication oil before delivering. You can operate it after installing and power on.

4.Low noise & low vibration
Atlas-copco air-end, low noise & vibration.

5.Reliability & Safety
Reliability bigger cooler, lower operating temperature.

Detailed Photos

Product Parameters

LSW-8A PM-8	8	116	0.5~1.1	10	7.5	510	Air Cooled	Belt Driven	57±2	G3/4”	—	—	8008001200
LSW-8A PM-10	10	145	0.4~0.9
LSW-11A PM-8	8	116	0.7~1.7	15	11	620	Air Cooled	Direct Driven	60±2	G3/4”	—	—	12008551335
LSW-11A PM-10	10	145	0.6~1.4
LSW-15A PM-8	8	116	1.0~2.3	20	15	670	Air Cooled	Direct Driven	60±2	G3/4”	—	—	12008551335
LSW-15A PM-10	10	145	0.9~2.0
LSW-18.5A PM-8	8	116	1.2~3.0	25	18.5	730	Air Cooled	Direct Driven	63±2	G1”	—	—	140015711340
LSW-18.5A PM-10	10	145	1.0~2.6
LSW-22A PM-8	8	116	1.5~3.6	30	22	780	Air Cooled	Direct Driven	63±2	G1”	—	—	140015711340
LSW-22A PM-10	10	145	1.3~3.0
LSW-30A PM -8	8	116	2.1~5.1	40	30	1150	Air Cooled	Direct Driven	66±2	G1-1/4”	—	—	165011801505
LSW-30A PM-10	10	145	1.8~4.3
LSW-37A PM-8	8	116	2.6~6.4	50	37	1200	Air Cooled	Direct Driven	66±2	G1-1/4”	—	—	165011801505
LSW-37A PM-10	10	145	2.2~5.4
LSW-45W PM-8	8	116	3.3~8.2	60	45	1490	Water Cooled	Direct Driven	68±2	G2”	G1-1/2”	10	180013601670
LSW-45W PM-10	10	145	2.8~7.0
LSW-55W PM-8	8	116	4.0~10	75	55	1570	Water Cooled	Direct Driven	69±2	G2”	G1-1/2”	12	180013601670
LSW-55W PM-10	10	145	3.4~8.5
LSW-75W PM-8	8	116	5.2~13.0	75	55	1750	Water Cooled	Direct Driven	69±2	G2”	G1-1/2”	18	180013601670
LSW-75W PM-10	10	145	4.4~11.1
LSW-90W PM-8	8	116	6.9~17.2	120	90	2450	Water Cooled	Direct Driven	73±2	G2-1/2”	G1-1/2”	20	220015501800
LSW-90W PM-10	10	145	5.9~14.6
LSW-110W PM-8	8	116	8.2~20.3	150	110	2580	Water Cooled	Direct Driven	75±2	G2-1/2”	G2”	24	220015501800
LSW-110W PM-10	10	145	7.0~17.3
LSW-132W PM-8	8	116	9.7~24.1	180	132	2700	Water Cooled	Direct Driven	75±2	G2-1/2”	G2”	30	270015501800
LSW-132W PM-10	10	145	8.2~20.5
LSW-160W PM-8	8	116	11.3~28.2	210	160	3900	Water Cooled	Direct Driven	77±2	G3”	G3”	35	300018002100
LSW-160W PM-10	10	145	9.6~24.0
LSW-185W PM-8	8	116	12.9~32.1	240	185	4050	Water Cooled	Direct Driven	77±2	G3”	G3”	38	300018002100
LSV180W PM-10	10	145	11.0~27.3
LSW-200W PM-8	8	116	13.8~34.5	270	200	4200	Water Cooled	Direct Driven	78±2	G4”	G4”	42	300018002100
LSW-200W PM-10	10	145	11.7~29.3
LSW-220W PM-8	8	116	15.5~38.6	295	220	4400	Water Cooled	Direct Driven	79±2	G4”	G4”	47	310018502100
LSW-220W PM-10	10	145	13.2~32.8
LSW-250W PM-8	8	116	17.1~42.6	340	250	4800	Water Cooled	Direct Driven	79±2	G4”	G4”	53	310018502100
LSW-250W PM-10	10	145	14.5~36.2

Company Profile

FAQ

Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.

Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.

Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.

Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory.

Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.

Q7: What’s the Min. Order requirement?
A7: 1unit

Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Water Cooling
Installation Type:	Stationary Type
Type:	Single Screw Compressor
Model:	Lsw200W Pm-10
Power:	200kw/ 270HP

Samples:	US$ 80517/unit 1 unit(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

Moisture Content:

Condensation: Water-lubricated compressors introduce moisture into the compressed air system. During the compression process, as the air cools downstream, moisture can condense and accumulate. This moisture can lead to issues such as corrosion, rust, and contamination of downstream equipment or processes.
Water Carryover: If the compressor’s water separation mechanisms are not efficient or if there are malfunctions in the water removal systems, water droplets or mist may carry over into the compressed air. This can negatively impact the quality of the compressed air and introduce moisture-related issues downstream.

Contamination:

Oil Contamination: In some water-lubricated compressors, there is a potential for oil to mix with the water used for lubrication. If oil and water emulsify or if there are leaks in the compressor system, oil contamination may occur. Oil-contaminated compressed air can have adverse effects on downstream processes, equipment, and products. It can lead to contamination, reduced performance of pneumatic components, and potential health and safety concerns.
Particulate Contamination: Water-lubricated compressors can introduce particulate matter, such as sediment, debris, or rust, into the compressed air system. This can occur if the water supply or water treatment systems are not adequately filtered or maintained. Particulate contamination can clog or damage pneumatic equipment, affect product quality, and cause operational issues in downstream applications.

Preventive Measures:

Water Separation: Water-lubricated compressors employ various water separation mechanisms to remove moisture from the compressed air. This includes moisture separators, water traps, or coalescing filters that are specifically designed to capture and remove water droplets or mist from the compressed air stream. Regular maintenance and inspection of these separation systems are necessary to ensure their proper functioning.
Air Treatment: Additional air treatment components, such as air dryers or desiccant systems, can be installed downstream of water-lubricated compressors to further reduce moisture content in the compressed air. These systems help to remove moisture that may have carried over from the compressor and ensure that the compressed air meets the required dryness standards for specific applications.
Proper Maintenance: Regular maintenance of water-lubricated compressors is essential to minimize the potential impact on compressed air quality. This includes routine inspection, cleaning, and replacement of filters, lubrication systems, and water separation components. Addressing any leaks, malfunctioning components, or system issues promptly can help maintain the integrity of the compressed air and prevent contamination or excessive moisture levels.

air compressor

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

When it comes to the use of water-lubricated air compressors, there are several regulations and standards that govern their operation and ensure compliance with safety, environmental, and performance requirements. Here’s a detailed explanation of the regulations related to water-lubricated air compressors:

1. Occupational Safety and Health Administration (OSHA) Regulations:

OSHA is a regulatory agency in the United States that sets and enforces workplace safety and health standards. While OSHA does not have specific regulations solely dedicated to water-lubricated air compressors, they have general regulations that apply to all types of air compressors. These regulations include requirements for safe operation, maintenance, and guarding of equipment to protect workers from hazards such as electrical shocks, mechanical injuries, and exposure to hazardous substances.

2. Environmental Protection Agency (EPA) Regulations:

The EPA is responsible for implementing and enforcing environmental regulations in the United States. Although there are no specific regulations for water-lubricated air compressors, the EPA has regulations that govern the discharge of water and other substances into the environment. If the water-lubricated compressor system involves the use of cooling water or generates wastewater, it may be subject to regulations related to water pollution control, water treatment, and proper disposal of wastewater.

3. International Organization for Standardization (ISO) Standards:

The ISO develops international standards that provide guidelines and requirements for various industries and technologies. ISO 8573 is a standard that addresses the quality of compressed air used in different applications. This standard sets limits and specifications for various contaminants in compressed air, including water content. Water-lubricated air compressors need to comply with the requirements of ISO 8573 to ensure the produced compressed air meets the desired quality standards.

4. Manufacturer Guidelines and Recommendations:

In addition to regulatory requirements, it is essential to follow the guidelines and recommendations provided by the manufacturers of water-lubricated air compressors. Manufacturers typically provide instructions for installation, operation, maintenance, and safety precautions specific to their equipment. Adhering to these guidelines is crucial to ensure the safe and proper functioning of the equipment and to maintain warranty coverage.

It’s important to note that the specific regulations and standards governing water-lubricated air compressors may vary depending on the country or region. Therefore, it is advisable to consult the relevant regulatory agencies, industry organizations, and local authorities to ensure compliance with applicable regulations and standards in a particular jurisdiction.

By complying with the relevant regulations, standards, and manufacturer guidelines, users of water-lubricated air compressors can ensure the safe and efficient operation of their equipment while minimizing any potential environmental impacts.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

Considering these factors, water-lubricated air compressors are well-suited for the food and beverage industries, ensuring compliance with hygiene standards, preventing product contamination, and promoting a safe and sustainable production environment.

China Hot selling CHINAMFG 200kw Screw Type Single Oil Free Dental Air Compressor air compressor price
editor by CX 2024-05-16

China OEM Stationary Type Modern 0il Screw Less Air Manufacturers Oil Free Compressor with Good Service with Best Sales

Product Description

If you are interested in any of our

FAQ

1 What trade terms do we provide? What kind of settlement currency do we offer?

Trade term :CIF ,CFR ,FOB,Ex-Works
As far Our business traded in Dollars ,Euros and RMB .

2 How long is our delivery?

Our standard delivery time is 30-40 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

3 What is the voltage of the compressor?

The available voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we provide other voltage according to customer requirement.

4 Can our compressor run in high temperature environment? What is the working temperature range for our machine?

Yes ,our machine would run in high temperature environment ,until now our products have been sold to many countries which would meet high temperature in summer ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc.
Work temperature range :1-45 ºC(33.8ºF-113ºF)

5 What’s the min. Order requirement ?

Min. Order requirement is 1PCS.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China OEM Stationary Type Modern 0il Screw Less Air Manufacturers Oil Free Compressor with Good Service with Best Sales
editor by CX 2024-05-15

China Good quality QA 30% Power Saving Air Compressor Professional Industrial Single Screw Compressors Oil Free High Efficiency Compressor 8-12.5bar 22kw arb air compressor

Product Description

Lead Time

Product Description

TR-22VA/W 0.8-1.25Mpa 8-12.5Bar 0.85-3.7m3/min 22KW air compressor oil free screw scroll China

Specifications

Model

Maximum

working

Pressure

FAD

Motor

Power

Noise

Pipe diameters of

cooling water

in and out

Quantity of
cooling water

Quantity of

lubricating

water

Dimension

Weight

Air

outlet

Inlet water

32ºC

L*W*H

Mpa

M3/min

T/H

TR-08VA/W

0.8

0.35-1.17

7.5

3/4″

8.4) optimized design, large rotor, low rotary speed (within 3000r/min), without the gearbox.

direct connection drive, it has a lower rotary speed and longer life compared with dry oil-free screw air compressor(10000r/min-20000r/min).

12. Automatic Cleaning System

The function of automatic water exchange and automatic system cleaning can be realized, and the interior of the compressor is more clean and sanitary.

Introduction

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:

Water Quality:

Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.

Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.

air compressor

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

Step 1: Identify the Problem:

Step 2: Check Water Supply:

Step 3: Inspect Water Filters and Strainers:

Step 4: Verify Water Pressure:

Step 5: Examine Water-Lubrication Components:

Step 6: Check for Air in the System:

Step 7: Inspect Cooling Mechanisms:

Step 8: Consult Manufacturer Documentation:

Step 9: Seek Professional Assistance:

By following these troubleshooting steps, you can effectively identify and address common problems encountered in water-lubrication systems, ensuring optimal performance and reliability.

air compressor

How Is Water Quality Crucial for the Performance of These Compressors?

Water quality plays a crucial role in the performance of water-lubricated air compressors. The quality of the water used for lubrication directly impacts the efficiency, reliability, and lifespan of these compressors. Here are the key reasons why water quality is essential for optimal compressor performance:

Lubrication effectiveness: Water serves as the lubricant in water-lubricated air compressors. The water forms a protective film between moving parts, reducing friction and wear. However, if the water contains impurities or contaminants, it can compromise the lubricating properties. Impurities like minerals, sediments, or dissolved solids can hinder the formation of an effective lubricating film, leading to increased friction and potential damage to the compressor components.
Corrosion prevention: Water with high mineral content, such as hard water, can promote corrosion within the compressor system. Minerals like calcium and magnesium can react with metal surfaces, leading to rust, scale formation, and degradation of internal components. Corrosion compromises the structural integrity of the compressor, reduces its efficiency, and may result in costly repairs or even premature failure.
Preventing blockages: Poor water quality can result in the accumulation of sediments, debris, or contaminants within the compressor system. These deposits can block water passages, filters, or valves, impeding the flow of water and affecting the overall performance of the compressor. Restricted water flow may lead to inadequate cooling, reduced lubrication, and compromised efficiency.
Preventing fouling and fouling-related issues: Fouling refers to the accumulation of organic or inorganic deposits on heat transfer surfaces, such as heat exchangers or radiators, within the compressor system. Poor water quality can contribute to fouling, reducing heat transfer efficiency and impairing the cooling capacity of the compressor. This can result in elevated operating temperatures, decreased performance, and potential damage to the compressor.
System cleanliness: Clean water is crucial for maintaining a clean and sanitary compressor system, especially in industries like food and beverage or medical applications. Contaminated water can introduce harmful bacteria, microorganisms, or particles into the compressor, posing a risk to product quality, safety, or patient well-being.

To ensure optimal performance and longevity of water-lubricated air compressors, it is important to monitor and maintain the quality of the water used for lubrication. Regular water analysis, proper filtration, and appropriate water treatment measures should be employed to remove impurities, control mineral content, and maintain the desired water quality. By ensuring clean and high-quality water, the compressor can operate efficiently, minimize the risk of component damage, and contribute to a reliable and safe compressed air system.

China Good quality QA 30% Power Saving Air Compressor Professional Industrial Single Screw Compressors Oil Free High Efficiency Compressor 8-12.5bar 22kw arb air compressor
editor by CX 2024-05-15

China Custom Best Price 61HP Oil Free AC Power Screw Air Compressor for General Industrial small air compressor

Product Description

Our Advantages

ZIQI Oil Free Water Lubricant Screw Air Compressor Advantages:

1. 100% oil-free , good reliability
There is no oil in the water-lubricated screw body, which will not cause oil pollution of the compressed air. It belongs to a
completely oil-free screw air compressor. Dry-type oil-free machine bearings, gearboxes, and intercoolers require oil to
participate in lubrication and sealing. The high temperature of the unit can easily cause oil leakage to pollute the compressed air. It is a semi-oil-free compressor.

2. Isothermal compression, high efficiency, no flammable, explosive, etc.
The operating temperature of the oil-free screw machine does not exceed 50ºC, and the gas does not expand to save energy by more than 15%. The exhaust temperature of the semi-oil-free screw machine is above 180ºC. The high temperature makes the bearing, screw, body, and sealing material have a very short service life and must be expensive. s material. The volatilization of lubricating oil at high temperatures can cause fires and explosions.

3. Power saving: water-lubricated compressor is 1 of the lower energy consumption of oil-free machines in the world.
CHINAMFG air dry oil-free air compressor 90KW, nameplate capacity 12.50m?/min (10bar), water-jet all oil-free air compressor 90KW, the actual measured air volume is 14.52m?/min (10bar), the displacement has increased by 16%, This means that users save 16% of electricity. According to the calculation based on running 24 hours a day and the electricity cost of 1.0 yuan/kWh, each unit can save 1.26 million yuan in electricity costs for 10 years.

4. The compression temperature is relatively low, the host has a long life, the maintenance cost is relatively low, and the
trouble-free operation cycle is long.The main engine of the water-jet all-oil-free compressor has a general warranty of 5 years and a design life of more than 25 years. Low maintenance costs are a reliable choice for formal enterprises to focus on energy management and reduce product costs.

5. Simple maintenance and no worries

It is as simple as a “water pump” to ensure no worries.

6.Dry
The water content in compressed air is low. All compressors produce 100% saturated water vapor. The pressure dew point of water-injected and oil-free compressed air is less than 40 degrees Celsius. Actually, it contains less water, and a lot of water in the air will be discharged. .

Motor	Air pressure			Air Flowing		Motor power		Dimension	Weight
Motor	mpa	bar	psi	m3/min	cfm	hp	kw	L(mm)W(mm)H(mm)	kgs
OF-11A	0.7	7	102	1.6	56	15	11	1100mm800mm1000mm	500
	0.8	8	116	1.5	53
	1	10	145	1.3	46
OF-15A	0.8	8	116	1.8	64	20	15	1130mm900mm1571mm	550
OF-18.5A	0.7	7	102	3.1	109	25	18.5	1400mm1000mm1200mm	600
	0.8	8	116	2.8	99
	1	10	145	2.5	88
OF-22A	0.7	7	102	3.7	131	30	22	1400mm1000mm1200mm	655
	0.8	8	116	3.4	120
	1	10	145	3	106
OF-30A	0.7	7	102	5.2	184	41	30	1920mm1170mm1320mm	1150
	0.8	8	116	4.7	166
	1	10	145	4.3	152
OF-37A	0.7	7	102	6.1	215	50	37	1920mm1170mm1320mm	1200
	0.8	8	116	5.6	198
	1	10	145	5	177
OF-45A	0.7	7	102	7.5	265	61	45	1920mm1170mm1320mm	1320
	0.8	8	116	6.8	240
	1	10	145	6	212
OF-55A	0.7	7	102	10	353	75	55	1930mm1320mm1535mm	1520
	0.8	8	116	9	318
	1	10	145	7.8	275
OF-75A	0.7	7	102	13	459	102	75	1930mm1320mm1535mm	1620
	0.8	8	116	12	424
	1	10	145	10	353
OF-90A	0.7	7	102	15.5	547	122	90	1930mm1320mm1535mm	1800
	0.8	8	116	14	494
	1	10	145	12.5	441
OF-110A	0.7	7	102	20	706	150	110	2150mm1600mm1680mm	3100
	0.8	8	116	18	636
	1	10	145	16	565
OF-132A	0.7	7	102	25	883	179	132	2150mm1600mm1680mm	3250
	0.8	8	116	23	812
	1	10	145	20	706
OF-160W	0.7	7	102	27	953	217	160	2860mm1500mm1750mm	4500
	0.8	8	116	25.5	900
	1	10	145	24	847
OF-185W	0.7	7	102	30	1059	251	185	2860mm1500mm1750mm	4500
	0.8	8	116	28	989
	1	10	145	25	883
OF-200W	0.7	7	102	36	1271	272	200	2860mm1500mm1750mm	4500
	0.8	8	116	33	1165
	1	10	145	27	953

*For more model,please contact the salesman person.

Packaging & Shipping

Company Profile

Certifications

FAQ

Are you manufacturer?
ZIQI: Yes,we are professional air compressor manufacturer over 10 years and our factory located in ZheJiang .
How long is your air compressor warranty?
ZIQI: For 1 year.
Do you provide After- sales service parts?
ZIQI: Of course, We could provide easy- consumable spares.
How long could your air compressor be used?
ZIQI: Generally, more than 10 years.
How about your price?
ZIQI: Based on high quality, Our price is very competitive in this market all over the world.
How about your customer service?
ZIQI: For email, we could reply our customers’ emails within 2 hours.
Do you support OEM?
ZIQI: YES, and we also provide multiple models to select.

How to get quicker quotation?

When you send us inquiry, please confirm below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.
This information is helpful for us to check suitable equipment solution and quotation quickly.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What Industries Commonly Use Water-Lubricated Air Compressors?

Water-lubricated air compressors find applications in various industries where specific operating conditions or regulatory requirements make them a preferred choice. Here are some industries that commonly utilize water-lubricated air compressors:

Food and Beverage: Water-lubricated compressors are often used in the food and beverage industry due to their ability to provide clean, oil-free compressed air. Compressed air is widely used in food processing and packaging applications, such as pneumatic conveying, product mixing, bottle blowing, and food packaging. Water-lubricated compressors help maintain product purity, prevent oil contamination, and comply with stringent food safety standards.
Pharmaceutical and Healthcare: The pharmaceutical and healthcare industries have strict requirements for compressed air quality, especially in applications where compressed air comes into direct contact with pharmaceutical products or is used in critical medical equipment. Water-lubricated compressors offer a viable solution by providing lubrication without the risk of oil contamination. They are commonly used for processes such as air agitation, medical device manufacturing, and laboratory applications.
Electronics and Semiconductors: In electronics and semiconductor manufacturing, where sensitive components and cleanroom environments are involved, oil-free compressed air is essential. Water-lubricated compressors can provide the required level of air purity without introducing oil particles or vapors that could contaminate the electronics or semiconductor production processes. They are used in applications such as chip manufacturing, circuit board assembly, and cleanroom air supply.
Textile and Garment: Water-lubricated compressors are utilized in the textile and garment industry, where the presence of oil can negatively impact the quality and appearance of fabrics or garments. Compressed air is widely used in textile machinery for tasks such as spinning, weaving, and air jet looms. Water-lubricated compressors ensure oil-free air supply, preventing oil stains or contamination that could affect the final textile or garment products.
Environmental and Wastewater Treatment: Water-lubricated compressors are also employed in environmental and wastewater treatment applications. These compressors help supply air for aeration processes in wastewater treatment plants, where air is introduced into the treatment tanks to facilitate the growth of beneficial bacteria for biological treatment. Water-lubricated compressors provide oil-free compressed air, ensuring the purity and effectiveness of the treatment process.

While the industries mentioned above commonly use water-lubricated air compressors, it is important to note that these compressors may also find applications in other sectors where oil-free, contamination-free compressed air is required for specific processes or environmental considerations.

air compressor

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

When comparing water-lubricated air compressors to other types of compressors, there are several factors that can influence the maintenance costs. Here’s a detailed explanation of how water-lubricated air compressors compare in terms of maintenance costs:

Initial Investment:

Higher Initial Cost: Water-lubricated air compressors tend to have a higher initial cost compared to oil-lubricated compressors. This is primarily due to the additional components required for the water-lubrication system, such as water pumps, filters, and separators. The higher initial investment can impact the overall cost of the compressor system.

Lubrication System Maintenance:

Water Treatment and Filtration: Water-lubricated compressors may require additional maintenance for water treatment and filtration systems. Regular monitoring, maintenance, and replacement of filters or treatment media are necessary to ensure the water quality remains suitable for lubrication. The cost of water treatment and filtration maintenance should be considered in the overall maintenance costs.
Water Quality Monitoring: Monitoring the quality of the water used in water-lubricated compressors is crucial. This may involve periodic water analysis, temperature monitoring, and water chemistry checks. The cost of water quality monitoring should be factored into the maintenance costs.

Component Lifespan and Replacement:

Extended Component Lifespan: Proper water-lubrication and cooling can contribute to the extended lifespan of compressor components. Reduced friction, effective cooling, and contaminant control can minimize wear and damage to components, leading to lower replacement costs over time. Water-lubricated compressors may have advantages in terms of component longevity, potentially reducing the frequency of component replacements.

Corrosion Prevention:

Corrosion Protection Measures: Water-lubricated compressors require corrosion prevention measures due to the presence of water within the system. Corrosion-resistant materials, coatings, or regular maintenance procedures are necessary to prevent corrosion-related issues. The cost of implementing and maintaining corrosion protection measures should be considered in the overall maintenance costs.

Overall, the maintenance costs of water-lubricated air compressors can vary depending on factors such as the specific design and components of the compressor, the quality of the water used, the effectiveness of water treatment and filtration systems, and the implementation of corrosion prevention measures. While water-lubricated compressors may have higher initial costs and additional maintenance requirements, they can potentially offer advantages in terms of extended component lifespan, reduced component replacements, and effective lubrication. It is important to consider these factors and consult the manufacturer’s guidelines to accurately assess the maintenance costs associated with water-lubricated air compressors.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

China Custom Best Price 61HP Oil Free AC Power Screw Air Compressor for General Industrial small air compressor
editor by CX 2024-05-14

China Professional Clean Dry Type Direct Drain Suction Oil Free Screw Air Compressor with CE best air compressor

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

1.Clean air 100% oil-free, class 0 oil free air according to ISO8537-1

2.Adopt GHH air end made in Germany

3.Technology patent used in oil free compressed air system

4.Significant energy saving, environmental-friendly and pollution-free

5.Low operation and maintenance cost

6.Powerful MAM microcomputer controller and touch screen

7.Designed especially for medical, pharmacy, instrument, coating, chemical industry and food processing, etc.

DENAIR Dry Type Oil Free Screw Air Compressor In Hannover Messe 2017

DENAIR Class 0 Certification

Comparison between dry oil free compressor and lubricated screw air compressor

Dry Type Oil-free Air Compressor Technical Parameters

Model	Maximum working pressure		Capacity(FAD)*				Installed motor power		Cooling Method	Noise Level**	Dimensions (mm)			Weight	Air Outlet Pipe Diameter
	Maximum working pressure		50 Hz		60 Hz		Installed motor power			Noise Level**	Dimensions (mm)			Weight
	bar(e)	psig	m³/min	cfm	m³/min	cfm	kW	hp		dB(A)	L	W	H	kG
DWW-55	7	102	9.35	330	8.06	285	55	75	Air Cooling W-water Cooling	74	2000	1200	1650	1900	G1-1/2″
	8	116	9.17	324	8.04	284	55	75		74	2000	1200	1650	1900	G1-1/2″
	10	145	8.11	286	7.05	249	55	75		74	2000	1200	1650	1900	G1-1/2″
DWW-55W	7	102	9.35	330	8.06	285	55	75		74	2000	1200	1650	1800	G1-1/2″
	8	116	9.17	324	8.04	284	55	75		74	2000	1200	1650	1800	G1-1/2″
	10	145	8.11	286	7.05	249	55	75		74	2000	1200	1650	1800	G1-1/2″
DWW-75	7	102	12.71	449	11.56	408	75	100		74	2000	1200	1650	2100	DN50
	8	116	11.78	416	11.53	407	75	100		74	2000	1200	1650	2100	DN50
	10	145	11.57	409	10.11	357	75	100		74	2000	1200	1650	2100	DN50
DWW-75W	7	102	12.71	449	11.56	408	75	100		74	2000	1200	1650	2000	DN50
	8	116	11.78	416	11.53	407	75	100		74	2000	1200	1650	2000	DN50
	10	145	11.57	409	10.11	357	75	100		74	2000	1200	1650	2000	DN50
DWW-90	7	102	14.6	515	13.61	480	90	120		76	2800	1800	1860	2800	DN50
	8	116	14.32	506	13.47	476	90	120		76	2800	1800	1860	2800	DN50
	10	145	13.55	478	12.5	441	90	120		76	2800	1800	1860	2800	DN50
DWW-90W	7	102	14.6	515	13.61	480	90	120		76	2800	1800	1860	2180	DN50
	8	116	14.32	506	13.47	476	90	120		76	2800	1800	1860	2180	DN50
	10	145	13.55	478	12.5	441	90	120		76	2800	1800	1860	2180	DN50
DWW-110	7	102	20.27	716	N/A***	N/A***	110	150		78	2800	1800	1860	3200	DN65
	8	116	19.03	672	N/A***	N/A***	110	150		78	2800	1800	1860	3200	DN65
	10	145	16.65	588	15.57	550	110	150		78	2800	1800	1860	3200	DN65
DWW-110W	7	102	20.27	716	N/A***	N/A***	110	150		78	2800	1800	1860	3050	DN65
	8	116	19.03	672	N/A***	N/A***	110	150		78	2800	1800	1860	3050	DN65
	10	145	16.65	588	15.57	550	110	150		78	2800	1800	1860	3050	DN65
DWW-132	7	102	23.94	845	20.09	709	132	175		78	2800	1800	1860	3340	DN65
	8	116	22.47	793	19.87	702	132	175		78	2800	1800	1860	3340	DN65
	10	145	20.19	713	N/A***	N/A***	132	175		78	2800	1800	1860	3340	DN65
DWW-132W	7	102	23.94	845	20.48	723	132	175		78	2800	1800	1860	3170	DN65
	8	116	22.47	793	20.26	715	132	175		78	2800	1800	1860	3170	DN65
	10	145	20.19	713	19.82	700	132	175		78	2800	1800	1860	3170	DN65
DWW-160	7	102	27.26	962	25.47	899	160	215		78	2800	1800	1860	3700	DN65
	8	116	25.86	913	25.17	889	160	215		78	2800	1800	1860	3700	DN65
	10	145	23.87	843	23.18	819	160	215		78	2800	1800	1860	3700	DN65
DWW-160W	7	102	27.26	962	25.47	899	160	215		78	2800	1800	1860	3300	DN65
	8	116	25.86	913	25.17	889	160	215		78	2800	1800	1860	3300	DN65
	10	145	23.87	843	23.8	819	160	215		78	2800	1800	1860	3300	DN65
DWW-185	7	102	30.19	1066	28.88	1571	185	250		78	2800	1800	1860	3900	DN65
	8	116	29.53	1043	28.3	999	185	250		78	2800	1800	1860	3900	DN65
	10	145	27.2	960	27.17	960	185	250		78	2800	1800	1860	3900	DN65
DWW-185W	7	102	30.19	1066	28.88	1571	185	250		78	2800	1800	1860	3460	DN65
	8	116	29.53	1043	28.3	999	185	250		78	2800	1800	1860	3460	DN65
	10	145	27.2	960	27.17	960	185	250		78	2800	1800	1860	3460	DN65
DWW-200W	7	102	36.41	1286	31.14	1100	200	270		78	3100	2150	2200	4300	DN100
	8	116	33.86	1196	30.52	1078	200	270		78	3100	2150	2200	4300	DN100
	10	145	30.35	1071	28.82	1018	200	270		78	3100	2150	2200	4300	DN100
DWW-220W	7	102	38.99	1377	37.54	1325	220	300		78	3100	2150	2200	4500	DN100
	8	116	37.93	1339	36.78	1299	220	300		78	3100	2150	2200	4500	DN100
	10	145	33.79	1193	31.08	1097	220	300		78	3100	2150	2200	4500	DN100
DWW-250W	7	102	47.26	1669	41.53	1466	250	350		78	3100	2150	2200	4550	DN100
	8	116	43.31	1529	40.69	1437	250	350		78	3100	2150	2200	4550	DN100
	10	145	38.88	1373	37.43	1322	250	350		78	3100	2150	2200	4550	DN100
DWW-280W	7	102	51.04	1802	N/A***	N/A***	280	375		80	3400	2400	2200	4800	DN100
	8	116	47.24	1668	N/A***	N/A***	280	375		80	3400	2400	2200	4800	DN100
	10	145	43.26	1528	41.4	1462	280	375		80	3400	2400	2200	4800	DN100
DWW-315W	7	102	52.03	1837	N/A***	N/A***	315	425		80	3400	2400	2200	5000	DN100
	8	116	51.04	1802	N/A***	N/A***	315	425		80	3400	2400	2200	5000	DN100
	10	145	47.18	1666	N/A***	N/A***	315	425		80	3400	2400	2200	5000	DN100

Low Pressure Dry Type Oil-free Air Compressor Technical Parameters

Model	Maximum working pressure		Capacity(FAD)*				Installed motor power		Cooling Method	Noise Level**	Dimensions (mm)			Weight	Air Outlet Pipe Diameter
	Maximum working pressure		50 Hz		60 Hz		Installed motor power			Noise Level**	Dimensions (mm)			Weight
	bar(e)	psig	m³/min	cfm	m³/min	cfm	kW	hp		dB(A)	L	W	H	kG
DWL-55-2	2.5	37	15.33	541	14.4	508	55	75	Air Cooling W-water Cooling	69	2100	1500	1790	2500	DN100
DWL-55-3	3.5	51	12.78	451	10.85	383	55	75		69	2100	1500	1790	2500	DN100
DWL-75-2	2.5	37	19.92	703	19.85	701	75	100		69	2100	1500	1790	2650	DN100
DWL-75-3	3.5	51	16.3	575	15.86	560	75	100		69	2100	1500	1790	2650	DN100
DWL-90-2	2.5	37	26.07	921	26.28	928	90	120		72	2800	1800	1860	2750	DN100
DWL-90-3	3.5	51	19.54	690	18.3	646	90	120		72	2100	1500	1790	2750	DN100
DWL-110(W)-2	2.5	37	33.16	1171	29.82	1053	110	150		72	3100	2150	2200	3500	DN150
DWL-110(W)-3	3.5	51	25.6	904	23.9	884	110	150		72	2800	1800	1860	3000	DN150
DWL-132(W)-2	2.5	37	40.24	1421	36.99	1271	132	175		72	3100	2150	2200	3600	DN150
DWL-132(W)-3	3.5	51	27.23	961	29.43	1039	132	175		72	2800	1800	1860	3100	DN150
DWL-160(W)-2	2.5	37	49.42	1745	45.2	1596	160	215		76	3100	2150	2200	3900	DN150
DWL-160(W)-3	3.5	51	35.75	1262	35.12	1240	160	215		76	3100	2150	2200	3800	DN150
DWL-185(W)-2	2.5	37	56.02	1989	52.71	1861	185	250		79	3400	2400	2200	4100	DN150
DWL-185(W)-3	3.5	51	42.21	1490	40.28	1422	185	250		79	3400	2400	2200	4000	DN150

*) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
**) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
***) TBD-To Be Discussed
****) W-Water cooling

DENAIR Factory

Why Choose DENAIR ?
1.Original Germany AERZEN/DENAIR air end,larger air delivery,lower noise.

2. Oil free screw air compressor Pass CE, ISO9001 Quality Certification

3. One of 3 biggest air compressor manufacturer in China

4. Complete before-on-after sales service

5. Immediate reply or solution by email or call
6.Special oil gas separator with patents

7.High efficiency motor, up to 96%

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling and Water Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Are the Safety Considerations When Using Water-Lubricated Compressors?

When using water-lubricated compressors, it is important to prioritize safety to prevent accidents, ensure the well-being of personnel, and maintain the integrity of the equipment. Here’s a detailed explanation of the safety considerations:

Electrical Safety: Compressed air systems, including water-lubricated compressors, often involve electrical components and connections. Ensure that the electrical systems are properly installed, grounded, and protected according to applicable electrical codes and regulations. Regularly inspect electrical components, such as motors, switches, and wiring, for any signs of damage or wear that could pose electrical hazards.
Pressure Safety: Water-lubricated compressors can operate at high pressures, presenting potential hazards. Follow the manufacturer’s guidelines and ratings to ensure that the compressor is operated within its specified pressure limits. Install and maintain pressure relief valves to prevent overpressurization and ensure the safe release of excess pressure. Regularly inspect pressure gauges, fittings, and connections for leaks, damage, or signs of degradation.
Heat and Cooling Safety: Compressed air systems generate heat during the compression process, and proper cooling is essential to maintain safe operating temperatures. Ensure that cooling mechanisms, such as water jackets or external cooling systems, are functioning correctly and provide adequate cooling capacity. Monitor and control the temperature of the compressed air and the cooling water to prevent overheating and minimize the risk of equipment damage or failure.
Water Quality and Treatment: The quality of the water used for lubrication is crucial for the performance and safety of water-lubricated compressors. Impurities, contaminants, or minerals in the water can lead to corrosion, blockages, or reduced lubrication effectiveness. Implement appropriate water treatment or filtration systems to maintain the desired water quality. Regularly monitor water quality and perform necessary maintenance and treatment to prevent potential safety and performance issues.
Maintenance and Inspection: Establish a routine maintenance and inspection program for the water-lubricated compressor system. Regularly inspect the compressor, water distribution system, filters, and other components for any signs of wear, damage, or deterioration. Follow the manufacturer’s recommended maintenance procedures, including lubrication, filter replacement, and system checks. Promptly address any identified issues to prevent safety hazards and maintain the reliable operation of the compressor.
Training and Personal Protective Equipment (PPE): Proper training of personnel who operate and maintain water-lubricated compressors is essential for safety. Ensure that operators and maintenance personnel are trained on the safe operation of the equipment, emergency procedures, and hazard identification. Provide appropriate personal protective equipment (PPE), such as safety glasses, gloves, and hearing protection, to minimize the risk of injuries from potential hazards, including high-pressure water, rotating parts, or noise.

It is important to consult applicable safety regulations, codes, and guidelines specific to your location and industry when using water-lubricated compressors. Additionally, follow the manufacturer’s instructions, warnings, and safety recommendations provided with the equipment to ensure the safe operation of water-lubricated compressors and mitigate potential risks.

air compressor

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

Initial Investment:

Higher Initial Cost: Water-lubricated air compressors tend to have a higher initial cost compared to oil-lubricated compressors. This is primarily due to the additional components required for the water-lubrication system, such as water pumps, filters, and separators. The higher initial investment can impact the overall cost of the compressor system.

Lubrication System Maintenance:

Water Treatment and Filtration: Water-lubricated compressors may require additional maintenance for water treatment and filtration systems. Regular monitoring, maintenance, and replacement of filters or treatment media are necessary to ensure the water quality remains suitable for lubrication. The cost of water treatment and filtration maintenance should be considered in the overall maintenance costs.
Water Quality Monitoring: Monitoring the quality of the water used in water-lubricated compressors is crucial. This may involve periodic water analysis, temperature monitoring, and water chemistry checks. The cost of water quality monitoring should be factored into the maintenance costs.

Component Lifespan and Replacement:

Extended Component Lifespan: Proper water-lubrication and cooling can contribute to the extended lifespan of compressor components. Reduced friction, effective cooling, and contaminant control can minimize wear and damage to components, leading to lower replacement costs over time. Water-lubricated compressors may have advantages in terms of component longevity, potentially reducing the frequency of component replacements.

Corrosion Prevention:

Corrosion Protection Measures: Water-lubricated compressors require corrosion prevention measures due to the presence of water within the system. Corrosion-resistant materials, coatings, or regular maintenance procedures are necessary to prevent corrosion-related issues. The cost of implementing and maintaining corrosion protection measures should be considered in the overall maintenance costs.

air compressor

What is a water lubrication air compressor?

A water lubrication air compressor, also known as a water-injected air compressor, is a type of compressor that utilizes water as a lubricant and cooling medium in its operation. Unlike traditional air compressors that rely on oil for lubrication, water lubrication air compressors offer specific advantages and are commonly used in certain applications. Here’s an overview of how water lubrication air compressors work and their key characteristics:

Working Principle:

In a water lubrication air compressor, the compression process involves injecting a controlled amount of water into the compression chamber. The water acts as a lubricant and cooling agent, ensuring smooth operation and preventing excessive heat buildup. As the air is compressed, the water lubricates the internal components, reducing friction and wear.

Advantages:

1. Reduced Environmental Impact: One of the significant advantages of water lubrication air compressors is their reduced environmental impact. These compressors eliminate the need for oil lubrication, resulting in lower oil consumption and the elimination of oil-related contamination risks. This makes them a more environmentally friendly option, particularly in applications where oil contamination must be avoided, such as in food processing or pharmaceutical industries.

2. Enhanced Air Quality: Water lubrication air compressors produce cleaner compressed air compared to oil-lubricated compressors. The absence of oil in the compression process eliminates the risk of oil carryover into the air system. This is essential in applications where clean and oil-free compressed air is required, such as in electronics manufacturing or spray painting.

3. Improved Energy Efficiency: Water lubrication air compressors can offer improved energy efficiency compared to oil-lubricated compressors. The water injected during the compression process helps in cooling the air, reducing the energy required for subsequent cooling and drying processes. This can lead to energy savings and lower operating costs.

4. Lower Maintenance Requirements: Water lubrication air compressors generally have lower maintenance requirements compared to oil-lubricated compressors. The absence of oil means no oil changes or oil filter replacements, simplifying maintenance tasks and reducing costs. However, regular checks and maintenance of the water filtration system are necessary to ensure the water quality and prevent any potential contamination issues.

Applications:

Water lubrication air compressors are commonly used in applications where clean and oil-free compressed air is critical. Some typical applications include:

Food and beverage processing
Pharmaceutical manufacturing
Electronics manufacturing
Spray painting and coating
Laboratories and research facilities
Dental offices

These compressors provide a reliable and environmentally friendly solution for industries and applications that require high-quality compressed air without oil contamination.

China Professional Clean Dry Type Direct Drain Suction Oil Free Screw Air Compressor with CE best air compressor
editor by CX 2024-05-14

China factory Oil Free Screw Air Compressors of Series 11-55kw manufacturer

Product Description

Product Presentatio

Compressor Type	Max Working Pressure		Capacity FAD		Installed Motor Power	Noise Level	Weight	Connection
Compressor Type	bar(e)	psi	l/s	m3/min	kw	dB(A)	kg	Connection
OF11A	7.5	109.0	25.9	1.6	11	68	1142	G1”
	8.5	123.0	22.6	1.4	11	68	1142	G1”
	10.0	145.0	19.1	1.1	11	68	1142	G1”
OF15A	7.5	109.0	37.2	2.2	15	69	1150	G1”
	8.5	123.0	34.8	2.1	15	69	1150	G1”
	10.0	145.0	29.4	1.8	15	69	1150	G1”
OF18A	7.5	109.0	47.6	2.9	18	69	1170	G1”
	8.5	123.0	45.3	2.7	18	69	1170	G1”
	10.0	145.0	36.9	2.2	18	69	1170	G1”
OF22A	7.5	109.0	58.5	3.5	22	70	1181	G1”
	8.5	123.0	52.7	3.2	22	70	1181	G1”
	10.0	145.0	44.6	2.7	22	70	1181	G1”
OF30A/W	7.5	109.0	78.2	4.7	30	67	1458	G1 1/2”
	8.5	123.0	73.3	4.4	30	67	1458	G1 1/2”
	10.0	145.0	65.1	3.9	30	67	1458	G1 1/2”
OF37A/W	7.5	109.0	96.1	5.8	37	68	1460	G1 1/2”
	8.5	123.0	91.6	5.5	37	68	1460	G1 1/2”
	10.0	145.0	82.2	4.9	37	68	1460	G1 1/2”
OF45A/W	7.5	109.0	113.9	6.8	45	74	1465	G1 1/2”
	8.5	123.0	108.5	6.5	45	74	1465	G1 1/2”
	10.0	145.0	100.3	6.0	45	74	1465	G1 1/2”
OF55A/W	7.5	109.0	143.5	8.6	55	78	1723	G2”
	8.5	123.0	138.6	8.3	55	78	1723	G2”
	10.0	145.0	132.3	7.9	55	78	1723	G2”
Size	L(mm)			W(mm)			H(mm)
Size	1785			1571			1800
PS: The above air flow data was collected when the ambient temperature was 20ºC.

Oil-free Screw Air Compressors

ISO CLASS 0: Oil free certification
Oil-free air is suitable for a wide range of industries where air quality is critical to end products and production processes. Among them, pharmaceutical, hospital oxygen, electronics, filling, food and beverage processing production processes and environments, even the smallest amount of oil pollution will lead to the quality of the products produced and the qualification rate will be reduced, which will lead to a significant increase in the cost of enterprises.

Compression assembly parts drawing
1. Large flow intake valve
2, Low voltage host
3, High voltage host
4, Precision transmission gear box 5, High efficiency main motor

Large flow low noise centrifugal fan
Low power consumption;
Low running noise;
High air volume and high back pressure.

Oil-free rotary tooth compression rotor
Self-profile high-efficiency toothed rotor;
Fine special coating;
Can quickly reach the lowest energy consumption under no load.

Precision transmission gear box
Self-designed compact gear box;
High precision signal gear;

Sensor
PT1000 high precision temperature sensor;
The current type pressure sensor ensures more accurate data.

Electronic level sensing drain valve
Reduce compressed air emissions and waste, Improve; condensate drainage efficiency and extend compressor life.

Oil filter
High quality precision filter;
The lubricating oil is cleaner and longer.

Air filter
High quality precision filter;
Improved air filtration accuracy;
Less resistance for air to pass through;
Guaranteed air quality in the rear stage.

Built-in compression rotor purge system
Extended compression rotor life;
Protect the oil-free rotor from moisture corrosion during shutdown.

Oil mist separator
Active condensate gearbox oil mist;
Improve environmental pollution inside and outside the machine;
Small structure for easy maintenance.

Applicable industry

Pharmaceutical industry
100% oil-free air helps to prevent contamination during processing (e.g. fermentation, aeration, pharmaceutical production, hospital oxygen production, automated production lines).

Medical care
Preferred choice for hospitals, dental clinics, medical device manufacturing, laboratory or clinical work environments.

Electronic products industry
Small and medium-sized electronics factory precision circuit board production and electronic component patch, semiconductor factory integrated circuit packaging process.

The food and beverage industry
100% pure, clean, oil-free air for a variety of uses such as fermentation, packaging, conveying, aeration, filling production and capping of alcoholic and beverage products, cleaning, instrument air.

Company Profile

HangZhou Hylein Energy & Environmental Technology Co., Ltd. is located in HangZhou, Pearl River Delta, known as China’s compressor production base, is a professional engaged in all kinds of screw air compressor, nitrogen machine, oxygen generator, vacuum pump, magnetic suspension compressor R & D, production and sales of manufacturing enterprises, with standard production assembly line, the introduction of Europe and North America mature and experienced technology, Focus on providing a full range of services for various industries.
We strictly follow the IS09001 quality system standards and related industry standards, and throughout the product design, procurement, manufacturing, inspection, sales and service of the entire process, we always adhere to the global procurement strategy to ensure the superior performance of each air compressor, we pay attention to the development of new products, the latest energy-saving products are providing quality services for the global industrial energy-saving cause.
In the ZheJiang -ZheJiang Railway oxygen supply system air compressor project, we overcome high altitude, ultra-low temperature, ultra-high temperature, huge dust, frequent switching power supply and other problems.

After-sales Service

Equipment support High efficiency and energy saving equipment since the start of normal commissioning, to ensure the normal operation of the equipment.

Service scheme Monthly, quarterly regular arrangement of personnel to the user phone or on-site equipment operation inspection, testing work, timely understanding of unit operation dynamics, effective answer to user equipment operation questions, and do the corresponding need to improve maintenance, maintenance, to ensure the long-term effective work of the equipment, while providing service reports every time.

Technical service As long as the user needs equipment and technical help and consultation, the company will accurately reply within 2 hours, and provide the relevant technical information.

Service team We have a CHINAMFG theoretical knowledge, practical ability of strong service team and high-quality management team.

Corresponding time Our company will respond within 2 hours after receiving the notification of the failure of the user’s equipment, provide the fastest solution, and arrange technicians to arrive at the scene as soon as necessary.

Warranty commitment High efficiency and energy saving equipment since the start of normal commissioning, the whole machine warranty for 1 year.

FAQ

Q1: What’s your delivery time?

O: It takes about 15 days, if there is any urgent order, please contact us.

Q2: How long is your air compressor warranty?

O: One year for the whole machine when the compressor leave our factory.

Q3: How about your after-sales service?

O:1. Provide customers with installation and commissioning online instructions.

2. Well-trained engineers available to overseas service

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Installation Type:	Stationary Type
Type:	Single Screw Compressor
Specification:	11-55kw

Customization:	Available \|

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

By following these practices, you can ensure proper water lubrication in air compressors, promoting efficient operation, minimizing wear and tear, and extending the lifespan of the equipment. Regular monitoring, maintenance, and adherence to manufacturer guidelines are crucial to optimize water lubrication and overall compressor performance.

air compressor

Can Water-Lubricated Compressors Be Integrated into Existing Systems?

Yes, water-lubricated compressors can be integrated into existing systems, but certain considerations need to be taken into account. Here’s a detailed explanation of integrating water-lubricated compressors into existing systems:

Space and Compatibility:

Physical Space: Before integrating a water-lubricated compressor into an existing system, it’s important to assess the available physical space. Water-lubricated compressors may require additional components such as water pumps, filters, and separators, which need to be accommodated within the existing system layout.
Compatibility: Compatibility between the water-lubricated compressor and the existing system is crucial. Factors such as pressure ratings, flow rates, electrical requirements, and control systems should be evaluated to ensure a seamless integration. It may be necessary to make modifications or upgrades to the existing system to achieve compatibility.

Water Supply:

Water Source: Integrating a water-lubricated compressor requires a suitable water source. The availability of a clean and reliable water supply should be assessed. The water source can be from a municipal water supply, a well, or other water storage systems depending on the specific requirements of the compressor.
Water Treatment: If the existing water supply does not meet the necessary quality standards for the water-lubricated compressor, water treatment systems may need to be installed. Water treatment can involve filtration, softening, or chemical treatment to ensure the water is clean and suitable for lubrication.

Installation and Configuration:

Professional Installation: Integrating a water-lubricated compressor into an existing system typically requires professional installation. Qualified technicians or engineers with experience in water-lubricated compressors should handle the installation process to ensure proper configuration and alignment with the existing system.
Piping and Connections: The installation may involve connecting the water-lubricated compressor to the existing piping system. Proper sizing, materials, and connections should be used to maintain the integrity of the system and prevent leaks or pressure losses.

System Performance and Optimization:

System Evaluation: After integrating the water-lubricated compressor, it’s important to evaluate the overall performance of the system. This includes assessing the compressor’s efficiency, lubrication effectiveness, cooling capacity, and any potential impacts on the existing components.
System Adjustments: Depending on the findings of the system evaluation, adjustments or fine-tuning may be necessary to optimize the performance of the integrated water-lubricated compressor. This can involve adjusting operating parameters, control settings, or making additional modifications to enhance system efficiency and reliability.

Overall, integrating water-lubricated compressors into existing systems is possible with proper planning, evaluation, and professional installation. Considering factors such as space availability, compatibility, water supply, installation requirements, and system optimization will help ensure a successful integration and the effective operation of the water-lubricated compressor within the existing system.

air compressor

How does a water lubrication system work in air compressors?

A water lubrication system in air compressors is designed to provide lubrication and cooling to the internal components of the compressor using water as the lubricant. This system offers an alternative to traditional oil lubrication systems and has specific advantages in certain applications. Here’s a detailed explanation of how a water lubrication system works in air compressors:

1. Water Injection:

In a water lubrication system, a controlled amount of water is injected into the compression chamber of the air compressor. This can be achieved through various methods, such as direct injection or atomization of water droplets.

2. Lubrication:

As the compressed air is generated, the injected water serves as a lubricant for the internal components of the compressor. The water forms a thin film on the surfaces, reducing friction and wear between the moving parts. This lubrication helps to improve the efficiency and lifespan of the compressor.

3. Cooling:

The water injected into the compression chamber also acts as a cooling medium. As the air is compressed, heat is generated, and the injected water absorbs some of this heat. The water carries away the heat, preventing excessive temperature rise and maintaining optimal operating conditions for the compressor.

4. Separation and Filtration:

After serving its lubrication and cooling purposes, the water needs to be separated from the compressed air. The compressed air and water mixture pass through a separator or filtration system, which separates the water from the compressed air. This can involve mechanisms such as centrifugal force, gravity separation, or filtration media.

5. Water Treatment:

In water lubrication systems, proper water treatment is essential to maintain the quality and performance of the system. Water filtration and purification processes are employed to remove impurities, contaminants, and any solid particles present in the water. This ensures that the injected water is clean and free from any substances that could potentially harm the compressor or the downstream air system.

6. Recirculation or Discharge:

Depending on the specific design of the water lubrication system, the separated water can be recirculated back into the system for reuse or discharged from the compressor. Recirculation systems involve the treatment and filtration of the water before reintroducing it into the compression chamber. Discharge systems, on the other hand, may involve further treatment or disposal of the water in an environmentally responsible manner.

By utilizing a water lubrication system, air compressors can benefit from reduced oil consumption, improved air quality, and enhanced energy efficiency. These systems are commonly employed in industries where oil contamination must be avoided, such as food processing, pharmaceutical manufacturing, and electronics production.

China factory Oil Free Screw Air Compressors of Series 11-55kw manufacturer
editor by CX 2024-05-13

China wholesaler CHINAMFG Screw Oilless Mini Single Portable Max Heavy Duty Used Industrial Part Dental Oil Piston Free Rotary AC Air Pump Compressor air compressor oil

Product Description

Scope of application:
Using for Pushing Pneumatic Nail Gun, Air Screw , Spray Painting Gun to work, also use to miniature instrument, blowing dust, Air inflation for small car and so on.

Oilless Air Compressor Featuers:
1.Super Silent
Super low noise.The output air pressure is stable without fluctuations, reducing noise pollution.

2. Safety

If the voltage or current cause the machine overheat, it will automatically shut down to protect from burnout.

3. Automatic control

Pressure switch automatically controls the start and stop of the machine.

4. Adjustable air pressure
The air pressure can be adjusted to meet the needs of different equipment usage.

5. Save human power

Switch on the air compressor can work normally & automatically. It is easy to operate and does not need human to be on duty.

6. Easy maintenance
No need to add any lubricant, easy maintenance after purchase.

Parts Features
1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise

2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable

3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.

4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.

5.High reliable and durable valve; strong aluminum alloy body, light and heat.

6.The motor provides reliable power, low voltage start up and running performance strong fan cooled motor and body; special shock proof design.

7.Double nozzles, were used to direct the exhaust and pressure exhaust; pressure switch with push button, safe and convenient

8.Oil free,silent,protect-environment,suitable for dental use.

Frequency Asked Question

1.Are you the manufacturer or trading company?
We are the manufacturer.

2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.

3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.

4.What’s the terms of payment?
T/T,L/C at sight or cash.

5.What’s the lead time?

In 15 days on receipt of deposit .

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	12 Month
Warranty:	12 Month
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What Industries Commonly Use Water-Lubricated Air Compressors?

Food and Beverage: Water-lubricated compressors are often used in the food and beverage industry due to their ability to provide clean, oil-free compressed air. Compressed air is widely used in food processing and packaging applications, such as pneumatic conveying, product mixing, bottle blowing, and food packaging. Water-lubricated compressors help maintain product purity, prevent oil contamination, and comply with stringent food safety standards.
Pharmaceutical and Healthcare: The pharmaceutical and healthcare industries have strict requirements for compressed air quality, especially in applications where compressed air comes into direct contact with pharmaceutical products or is used in critical medical equipment. Water-lubricated compressors offer a viable solution by providing lubrication without the risk of oil contamination. They are commonly used for processes such as air agitation, medical device manufacturing, and laboratory applications.
Electronics and Semiconductors: In electronics and semiconductor manufacturing, where sensitive components and cleanroom environments are involved, oil-free compressed air is essential. Water-lubricated compressors can provide the required level of air purity without introducing oil particles or vapors that could contaminate the electronics or semiconductor production processes. They are used in applications such as chip manufacturing, circuit board assembly, and cleanroom air supply.
Textile and Garment: Water-lubricated compressors are utilized in the textile and garment industry, where the presence of oil can negatively impact the quality and appearance of fabrics or garments. Compressed air is widely used in textile machinery for tasks such as spinning, weaving, and air jet looms. Water-lubricated compressors ensure oil-free air supply, preventing oil stains or contamination that could affect the final textile or garment products.
Environmental and Wastewater Treatment: Water-lubricated compressors are also employed in environmental and wastewater treatment applications. These compressors help supply air for aeration processes in wastewater treatment plants, where air is introduced into the treatment tanks to facilitate the growth of beneficial bacteria for biological treatment. Water-lubricated compressors provide oil-free compressed air, ensuring the purity and effectiveness of the treatment process.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

Overall, water-lubricated air compressors play a significant role in various automotive applications, including tire inflation, painting and finishing, brake and suspension systems, and diagnostic and testing equipment. Their use helps ensure efficient and reliable operation, improved productivity, and high-quality results in automotive service, repair, and manufacturing processes.

air compressor

How does a water lubrication system work in air compressors?

1. Water Injection:

2. Lubrication:

3. Cooling:

4. Separation and Filtration:

5. Water Treatment:

6. Recirculation or Discharge:

China wholesaler CHINAMFG Screw Oilless Mini Single Portable Max Heavy Duty Used Industrial Part Dental Oil Piston Free Rotary AC Air Pump Compressor air compressor oil
editor by CX 2024-05-09

Product Description

What Are the Key Components of a Water-Lubrication System in Compressors?

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

Advantages of Using Water as a Lubricant in Air Compressors

Product Description

What Is the Role of Water Separators in Water-Lubricated Compressors?

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

Are There Any Downsides to Using Water-Lubricated Air Compressors?

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

What Is the Role of Filtration in Water-Lubricated Air Compressors?

What Maintenance Is Required for Water-Lubricated Air Compressors?

Product Description

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Product Description

What are the advantages of using an air compressor in construction?

Are there differences between single-stage and two-stage air compressors?

Can air compressors be used for automotive applications?

Product Description

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

How Is Water Quality Crucial for the Performance of These Compressors?

Product Description

What Industries Commonly Use Water-Lubricated Air Compressors?

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

What Are the Safety Considerations When Using Water-Lubricated Compressors?

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

What is a water lubrication air compressor?

Product Description

How Do You Ensure Proper Water Lubrication in Air Compressors?

Can Water-Lubricated Compressors Be Integrated into Existing Systems?

How does a water lubrication system work in air compressors?

Product Description

In 15 days on receipt of deposit . 6.Do you accept sample order?Yes,we accept. 7.What about the cost of sample? You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.

What Industries Commonly Use Water-Lubricated Air Compressors?

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

How does a water lubrication system work in air compressors?

In 15 days on receipt of deposit .

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.