Tag Archives: centrifugal compressor air

China factory 0.6-25 Kg/Cm2 15bar Oil Free Turbo Centrifugal Air Compressor mini air compressor

Product Description

Centrifugal Air Compressor

Product Description

Oil-free Principle

Based on the working principle of centrifugal compressors, Geso’s entire

series of centrifugal compressors and blower air systems.

It is a completely independent working system from the oil system,Based

on the working principle of centrifugal compressors,Geso’s entire series

of centrifugal compressors and blower air systems fundamentally

ensuring that the compressed air is absolutely oil-free.

Safe and reliable

Fewer moving parts and low failure rate

The rotor has been strictly dynamically balanced to

ensure the lowest vibration

Efficient sealing ensures lower leakage

High efficiency and energy

Dynamics optimized design to ensure the most

efficient operation of working parts and systems

Advanced impeller design, optimal unit efficiency

and wider control range

20 years long life

CHINAMFG product design is scientific and rigorous,

and after strict material selection, the design life

of the whole machine exceeds 20 years

Air System

The filtered gas enters the inlet of the unit and is accelerated by the high-speed rotating impeller, which increases the gas flow rate. The high-flow gas passes through the diffuser, converts its speed energy into pressure and temperature,and enters the gas cooler to release excess heat. This process is repeated at each successive stage until the required operating pressure and temperature are reached.

Intake Xihu (West Lake) Dis. VaneIntake

The electric intake guide vane valve caelyn accurat control the opening of the

guide vane, thereby accurately adjusting the inlet air volume.

Pipe

The grooved pipe fitting method does not damage the inner wall of pipeline and the original characteristics of the pipeline are not affected

It has the character istics of flexibility, which makes the pipeline resistant to earthquakes,telescopicity and expansion, high stability and easy maintenance.

The pipelines are designed for large flow, and the transition between pipelines is smooth to minimize the pressure drop.

High Efficiency Cooler

Large flow design, surface coating treatment. It adopts the design of water leakage in the pipe and air leakage in the shell, which is easy to clean,corrosion-resistant and not easy to scale.

The cooler core is removable for easy maintenance and cleaning

Excellent cooling effect, adaptable to various complex working conditions

Transmission system and sealing

The unit adopts a horizontally split design, which is convenient for disassembly and assembly and subsequent maintenance.

The gearbox is made of high-performance ductile iron material and is integrally cast with anti-rust and anti-corrosion treatment on the surface to ensure a long service life.

Lubrication System

A complete lubrication system is a strong guarantee for the stability of the centrifugal compressor.

The fuel tank, fuel pump, accessories and connecting elbows are carefully designed and selected from materials.

Reliable, clean, energy-saving, and redundantly protected lubricating oil system, every detail shows quality

Lubricating Oil Pipeline Design

All are made of sanitary grade SUS304 stainless steel tubes and are designed in one-step molding without welding points.

No fluid flow dead center.

No processing residues in the tube

Ensure there are no leaks and minimal pressure drop when the machine is running.

Oil Mist Extraction System

Effectively prevent lubricating oil from oxidizing and extend lubricating oil service life .

Electrically controlled, low-noise blower eliminates in-duct processing residue on instrument air supply.

Ensure there are no leaks and minimal pressure drop when the machine is running.

Tank

High-strength carbon steel, internal anti-corrosion coating treatment.

High-strength,large-capacity design

Main Oil Pump

The main oil pump adopts an over-flow design to ensure that the unit can stop

safely in the event of a sudden power outage, ensuring that the machine has no

leakage points and minimal pressure drop during operation.

Auxiliary oil pump

Electrically driven, interlocked with the unit’s start switch to ensure that the unit is fully lubricated before starting up and when shutting down.

Stand-alone Plc Controlsystem

Overall Control Cabinet

The control interface is clear and easy to understand, and the touch screen operation is simple and fast.
LCD Screen

Display various parameters and real-time data monitoring to ensure reliable operation of the equipment.
Automatic Mode

When the gas volume fluctuates greatly, the gas volume is adjusted by the IGV, when the gas volume continues to decrease, load/unload control is used. Really

achieve on-demand energy consumption.

Multi Machine Intelligent Centralized Control System

Online control:

Multiple compressors can be jointly controlled to

realize a true compressed air network and improve

gas quality and production efficiency.

Energy efficiency optimization:

Customers can choose analysis software to conduct

operation monitoring, fault warning, and energy

efficiency analysis for each air compressor.

Modular Design

CHINAMFG centrifugal compressors are provided with standard integral skid mounting.

For special installation occasions, we provide a unique modular design, where the main body, cooler, fuel

tank, motor, and control cabinet are designed as separate modules. It has the characteristics of convenient

transportation, installation and maintenance.

Overall Skid Installation

Separate Assembly

Split assembly is mainly suitable for small spaces and other special installation occasions.

Installation issues are taken into consideration for each module in the early stages of design,and a modular design is adopted to make the assembly quality more stable.

At the customer’s site, the machine can be assembled in a very short time.

Each module can be transported and installed separately, which greatly reduces the volume and weight of transportation and installation, and reduces transportation costs.

Product Parameters

Certifications

Packaging & Shipping

Company Profile

Geso is a global aerodynamic systems group of companies, wholly owned by BAE CHINAMFG SYSTEMS, headquartered in London, United Kingdom, and a leader in the European gases sector.
BAE Systems, the parent company of CHINAMFG Group, was founded in 1871 and is committed to the research and development and production of industrial gases. In 2002, BAE Systems set up a representative office in China, importing products from the United Kingdom to China and deploying after-sales service offices in China, and in 2018 BAE Systems established a wholly-owned company “ZheJiang Geso systems Industrial PLC and invested 11 million U.S. dollars to build an intelligent manufacturing center; dedicated to research and development, production and market development. Our products include energy-saving screw air compressors, nitrogen/oxygen generators, dry oil-free air compressors, water-lubricated oil-free air compressors, mobile air compressors, process gas compressors, medium and high-pressure screw air compressors, centrifugal air compressors, etc., which are widely utilized in various production and industrial fields, and we have set up the “ZheJiang Geso systems Industrial PLC”, “ZheJiang Geso Equipment Co.,Ltd.”, “ZheJiang Geso Energy Equipment Co.,Ltd.” 3 companies, more than 30 branches and offices throughout the country, more than 200 distributors, for all walks of life to provide high-quality intelligent energy-saving air compressor system solutions.
Geso Group inherits the advanced technology and production management mode of British BAE Systems, combined with the Chinese market demand, in order to ensure the production safety of the user, strictly follow the Group’s product development process, each new product after 40 test items and 3000 hours of durability testing, to protect the quality of the product from the source; CHINAMFG compressor adopts the high quality screw compression element developed by BAE Systems, The material is used in the construction of large ships and nuclear submarines, which ensures the service life of the air compressor. The structure of the air compressor has been developed by the design team of BAE Group headquarters, which ensures the product quality and energy-saving effect. IE5 energy-saving motors, ABB electronic control system, and three-stage frequency conversion energy-saving system are selected to reduce energy consumption and carbon dioxide emissions, which saves costs for customers and realizes small investment and big power. Meanwhile, by optimizing the design and reducing the screw compression element’s speed, our air compressors have excellent silent performance. Independent research and development of intelligent Internet of Things (IoT) technology realizes the automatic and precise supply of air compressor and nitrogen generator equipment with the actual demand amount of the user to meet the automation experience of unattended, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking and evaluation feedback. Convenient interconnected management with air compressors is realized through computers, cell phones and iPads. In addition, the reasonable construction and excellent workmanship of Geso reduces unnecessary maintenance work in normal times, making maintenance more convenient and efficient.
Through years of high-speed development, Geso Group has service outlets in more than 2 hundred cities across the country, 24-hour service hotline response and Internet warranty service. Thirteen direct spare parts warehouses to provide customers with repair services in a more rapid and timely manner.
After-sales service is not only limited to the product itself, but also includes a series of complete systematic services such as compressed air system testing and optimization, intelligent air supply control for air compressors, waste heat recovery, variable frequency piping, piping, cables, and construction turnkey projects. The service engineers not only undergo strict training and assessment, but also equipped with professional testing and maintenance tools to provide customers with quality service experience and escort production.
We are committed to a lifetime free of labor charges to reduce the user’s cost of use and avoid the phenomenon of indiscriminate charges. Based on our service concept to provide customers with free training services, regular testing of the user’s energy efficiency report data and develop energy-saving programs to ensure user satisfaction and energy-saving effect. For 3 consecutive years, we have been selected as 1 of the top 10 brands by third-party organizations such as China Brand Network.
As a global aerodynamic systems group of companies, we carry the mission of innovation, quality and service. Whether it is energy saving and environmental protection, quiet performance or intelligent, always adhere to the praise of the customer experience as the center of the hard workers, Geso, to create a global CHINAMFG brand of fluid machinery, and continue to become a high-end energy-saving products industry leader.
Timeline of Geso history

BAE MARCONI ELETRONIC SYSTEMS was founded in 1871 in London, England. In the same year, we developed and produced the first reciprocating compressor and devoted ourselves to the development and production of industrial gases.
In 1910, the company’s main business expanded to multiple areas: air compressors, nitrogen/oxygen air separation equipment, integrated electronic products, the company’s core product development of single-cylinder reciprocating air compressor technology and mass production.
In 1999, the company was founded as “BAE CHINAMFG SYSTEMS LTD” and developed the first twin-screw air compressor and established the brand “GESO SYSTEMS”.
In 2000, the company developed and produced the first dry-type oil-free screw machine into the market, and it is widely used in the European medical, food and electronic industries.
In 2002, BAE Group set up a representative office in China, products from the United Kingdom after the production of original imported equipment for the Chinese market expansion, and successfully entered the Chinese aerospace and high-precision machining field market.
In 2006, a total of 26 after-sales service operation outlets were built in each provincial capital city in China, fully deploying the after-sales service system to quickly respond to and safeguard users’ experience and production safety.
In 2016, a warehousing and logistics center was established in ZheJiang , China, to ensure the timely supply of complete machines and spare parts for the Chinese market.
In 2018, the British BAE Group registered in China to establish “ZheJiang Geso systems Industrial PLC” and set up a compressor assembly and production plant in ZheJiang , China at the same time, with a registered capital of 11 million U.S. dollars.
In 2571, ZheJiang Geso systems Industrial PLC. invested and established “ZheJiang Geso Equipment Co., Ltd.” and set up a nitrogen/oxygen air separation equipment sales company in HangZhou, and in the same year, set up the second phase of the project of 300 sets of nitrogen/oxygen equipments in ZheJiang factory. The R&D and production of nitrogen/oxygen control equipment was added.
In 2571, we invested in the establishment of “ZheJiang Geso Energy Equipment Co., Ltd.” and registered some of the former offices in provincial capitals as branches to complete the separation of production and sales, and to realize the high efficiency and convenience of national market development and service.

Our Advantages

Core components: the screw compression element adopts the British R & D BAES series screw compression element , the material is used in the United Kingdom in the construction of aircraft carriers, nuclear submarine construction , fine material to ensure that the service life of the air compressor, decades still as new; high-quality S K F bearings life as high as 100,000 (100 thousand) hours; the use of imported ASCO valves and CHINAMFG solenoid valves ABB electrical components, to ensure that the system is safe and stable operation for long periods of time.
Science and technology research and development: the structure of the air compressor is developed by the design team at the headquarters of BAE Group in the UK, so that the quality and energy saving of the air compressor is satisfactory to the users. The R&D personnel of the British headquarters total 220 people, dedicated to energy-saving system research and development funds of 1.5 million U.S. dollars per year, to ensure that the equipment of energy-saving products of superiority; air separation equipment selection of the German CHINAMFG controller and touch screen, flow, purity, pressure and dew point intuitively presented in the touch screen, the process and the action screen vivid image, at a glance, leaving the DCS remote ports, the data can be transmitted to a centralized control room and cell phone terminal. The data can be transmitted to the central control room and mobile phone;
Energy saving and environmental protection: IE5 energy-saving motors, ABB electronic control system, three-level frequency conversion (motor, fan, oil pump) energy-saving system, in the selection of materials and process design, the selection of special stainless steel management connection, the design of which ensures that the internal leakage of air compressor air volume ≤ 0.571m³/min, the use of imported fibers oil and gas separation technology and oil and gas barrel precision design, the reasonable location of the pipeline with the air compressor The internal pressure difference ≤ 0.003MPa, thus reducing energy consumption, reducing carbon dioxide emissions, reducing the use of cost, small investment, big power;
Strong silent performance: through the optimization of air compressor design and air compression element performance enhancement, reduce the air compression element speed, not only to extend the service life of the air compressor, and at the same time significantly reduce the noise generated by the equipment, CHINAMFG polyester fiber polymer material developed from the sound insulation cotton and customized rubber shock absorbers, the silent equipment to bring the protection of the equipment, equipment operators and production personnel to bring the health and safety of the guarantee;
High degree of automation: The company has independently developed intelligent Internet of Things technology combined with air compressor and nitrogen generator equipment, which collects data to the cloud data processor through 2G/4G/NB-loTLoRa/Ethernet, automatically matches the accurate supply of gas with the user’s actual demand, and realizes the automation experience of unmanned, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking, and evaluation feedback. It realizes unattended remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless connection, evaluation and feedback.
Convenient maintenance: reasonable construction, fine workmanship, reduce the usual unnecessary maintenance, cleaning and maintenance is more convenient, in the special design process, so that the efficiency of the maintenance staff to improve, to protect the user to use the timeliness;
One-stop service: complete product range, one-stop service for air system and gas engineering.
Qualification and certification: Geso has obtained ISO14001 environmental management system, ISO45001 health management system and ISO9001 quality management system certification, certificate 0 oil-free certification, CE EU certification, air compressor energy-efficiency certification, 3A integrity system certification and other certificates from authoritative certification organizations, which can fully guarantee the safety of users, and has been highly recognized by the market and users. We are highly recognized by the market and users.

Product Manufacturing and Acceptance Standards
The design, manufacture, installation and acceptance of screw air compressor are all based on the relevant Chinese national standards (GB) and in accordance with the requirements of the following relevant standards, norms and regulations (but not limited to), with full consideration of the impact of local environmental conditions and conditions of use.

No.	Standard	Item
1	GB150-1998	Steel Pressure Vessels
2	GB151-1998	Steel Shell and Tube Heat Exchangers
3	JB/T4709	Steel Pressure Vessel Welding Regulations
4	GB/T13278	Technical conditions for general screw air compressors
5	GBJ78	Noise hygiene standards for industrial enterprises
6	GB3853	Test Methods for Pneumatic Compressor Performance for General Use
7	GB4980	Determination of sound power level of volumetric compressor noise – Engineering method
8	JB8-82	Product Labeling
9	ASME-PTC-9-1970 (American Society of Mechanical Engineers standards)	Air compressor performance test standards
10	VDI-2056 (Standard of the Association of German Engineers)	Operating Vibration Test Standards
11	ISO-2151 (International Organization for Standardization standard)	Operating Noise Test Standards
12	GBJ29-90	Compressed air station design specification
13	GB3323-87	Radiographic and quality analysis of steel melting welded joints
14	GB4720	Electrical Control Equipment Part I Low Voltage Electrical Control Equipment
15	JB4127	Mechanical Seal Technical Condition 3 Main Technical Data

After Sales Service

1 Technical services: regardless of pre-sale, sale, after-sale, as long as the user side demand equipment technical help and consulting, the company will be accurate within 24 hours to provide relevant technical information free of charge.
2 After the successful on-site start-up and commissioning acceptance, our after-sales engineers are responsible for the user’s operators to carry out routine and emergency operation training.
3 Under normal operation, maintenance and repair of the equipment, the whole unit is guaranteed for 1 year, and the air compression element is guaranteed for 5 years. During the warranty period, the non-wearable parts in the unit, damage or failure under normal use, are gratuitous compensation, free of charge replacement.
4 Regardless of the warranty period inside and outside, my company will be on schedule to the factory inspection of gas purity, flow, pressure, voltage, current, screws tightness, etc. are to do a comprehensive test in a timely manner to understand the dynamics of the unit’s operation, such as receiving the notification of the user’s equipment failure, on-call.
5 In normal operation, my company will be monthly, quarterly and regularly arranged for the user to telephone or after-sales engineers to the scene to do the equipment operation visit work, timely understanding of the unit operation dynamics, received the user equipment failure notification, the office to immediately give a telephone reply, within 1 hour to the scene to deal with. Office in the field can not deal with the situation, the ZheJiang head office will be sent directly to the scene within 24 hours to deal with after-sales engineers. In order to ensure the long-term stability of the equipment work.
6 Spare parts service: In case of damage to tubing parts, Geso will solve the problem first, then determine the responsibility, and then talk about the price, and then replace the parts after the problem is solved.
7 Free labor fee, Geso company lifetime free labor fee, reduce the user cost of use, to avoid the phenomenon of indiscriminate charging.
8 Service quality assurance: the company’s after-sales service personnel in the headquarters of the Geso after systematic training and strict examination to obtain technical certificates to ensure that each after-sales service personnel’s ability to deal with technology.
9 Service outlets: the company has after-sales service outlets in most areas of China, to ensure that the user’s problems are solved in a short period of time and there is a storage center in the after-sales service outlets to ensure the timely supply of spare parts.
10 Free training service: Geso company through the site operation training to ensure the correct use of the user operator, Geso company will be adjusted for the user personnel, re-training on-site personnel operation, each training are not charged any fees.
11 Energy-saving services: If you buy our product line, our company will regularly test the user energy efficiency report data, energy-saving data distraction and develop programs, timely energy-saving adjustments to the equipment, to protect the user’s energy savings and cost reductions.

Customer Cases

No.	Customer‘s company name	Quantities
1	HangZhou Risen Electromechanical Co.,Ltd.	5 units
2	HangZhou Nuoyi Laser Equipment Co.,Ltd.	3 units
3	ZHangZhoug Luneng Renewable Resources Co.,Ltd.	4 units
4	HangZhou Renliang Medical Machinery Equipment Co.,Ltd.	2 units
5	ZheJiang CHINAMFG Limited Liability Company	6 units
6	HangZhou CHINAMFG Machinery Co.,Ltd.	1 unit
7	HangZhou CHINAMFG Trading Co.,Ltd.	1 unit
8	ZheJiang Veneta Clothing Co.,Ltd.	1 unit
9	ZheJiang CHINAMFG Intelligent Equipment Co.,Ltd.	7 units
10	HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.	6 units
11	ZheJiang Zhongfa Environmental Protection Co.,Ltd.	6 units
12	ZheJiang CSIC Lingang Shipbuilding Equipment Co.,Ltd.	2 units
13	ZheJiang Wangxin Soybean Products Equipment Co.,Ltd.	2 units
14	ZheJiang Zhi Fu Pharmaceutical Technology Partnership (Limited Partnership)	2 units
15	Hongli Shoe Material	5 units
16	HangZhou HangZhoun Metal Products Co.,Ltd.	6 units
17	ZheJiang CHINAMFG Logistics Machine Co.,Ltd.	3 units
18	ZheJiang Qiangxiong Construction Group Co.,Ltd.	5 units
19	HangZhou CHINAMFG Logistics Machine Co.,Ltd.	4 units
20	Hongzheng Electric Co.,Ltd.	3 units
21	HangZhou Hengjun Technology Co.,Ltd.	3 units
22	ZheJiang Dajing Biological Engineering Co.,Ltd.	5 units
23	HangZhou Yi Ai Electronic Technology Co.,Ltd.	7 units
24	ZheJiang Shengwei Bio-technology Co.,Ltd.	2 units
25	ZheJiang Jiuding New Material Co.,Ltd.	4 units
26	HangZhou Xitu Environmental Protection Technology Co.,Ltd.	2 units
27	ZheJiang Taiqing Mechanical & Electrical Co.,Ltd.	3 units
28	HangZhou Guitai Pipe Industry Co.,Ltd.	6 units
30	HangZhou Przeszler Advanced Molding Technology Co.,Ltd.	4 units
31	HangZhou CHINAMFG Thermal Power Co.,Ltd.	1 unit
32	HangZhou Tellier Environmental Protection Group Co.,Ltd.	1 unit
33	ZheJiang CHINAMFG Electric Power Design & Consulting Co.,Ltd.	3 units
34	HangZhou Hongfengde Auto Parts Co.,Ltd.	2 units
35	ZheJiang ZHangZhoug Mining Group Company Limited Danying Coal Mine, Gubao Township, Xiwen County	6 units
36	ZheJiang Zhongmin Da Zheng Surface Engineering Technology Co.,Ltd.	4 units
37	NDT Group YuHangZhou Environmental Protection Equipment Manufacturing Co.,Ltd.	4 units
38	ZheJiang Vimet Decoration Material Technology Co.,Ltd.	3 units
39	Kangyue Biotechnology Co.,Ltd.	2 units
40	HangZhou Kangcai Medical Supplies Co.,Ltd.	5 units
41	Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd.	3 units
42	HangZhou CHINAMFG Packaging Industry Co.,Ltd.	2 units
43	HangZhou Tianlai Environmental Protection Equipment Co.,Ltd.	6 units
44	HangZhou Yongzhengxin Hardware Machinery Factory	3 units
45	HangZhou Industrial Park Shunhao Machinery Factory	2 units
46	HangZhou Chemical Machinery Manufacturing Co.,Ltd.	2 units
47	HangZhou Dehai Environmental Protection Technology Development Co.,Ltd.	3 units
48	ZheJiang Maosheng Environment Co.,Ltd.	1 unit
49	Air Force Engineering University Aviation Engineer Officer School	1 unit
50	ZheJiang Tiantuo Equipment Manufacturing Co.,Ltd.	1 unit
51	HangZhou Chemical Machinery Manufacturing Co.,Ltd.	2 units
52	HangZhou HangZhou Clothing Co.,Ltd.	2 units
53	HangZhou CHINAMFG Glass Co.,Ltd.	2 units
54	HangZhou City HangZhou Xihu (West Lake) Dis.ent City Development and Management Co.,Ltd.	2 units
55	HangZhou Sunshine CHINAMFG Chemical Engineering Co.,Ltd.	3 units
56	HangZhou CHINAMFG Electric Appliance Manufacturing Co.,Ltd.	4 units
57	HangZhou Xihu (West Lake) Dis. Electric Co.,Ltd.	3 units
58	HangZhou Saida Construction Machinery Co.,Ltd.	2 units
59	HangZhou Tellier Environmental Protection Co.,Ltd.	1 unit
60	ZheJiang Lvjing Environmental Protection Technology Engineering Co.,Ltd.	1 unit
61	China Construction Third Bureau Second Construction Engineering Co.,Ltd.	1 unit
62	HangZhou Przeszler Advanced Molding Technology Co.,Ltd.	1 unit
63	HangZhou Bochuang Environmental Protection Technology Co.,Ltd.	2 units
64	HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd.	1 unit
65	ZheJiang Renze Technology Co.,Ltd.	1 unit
66	Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd.	1 unit
67	ZheJiang Haibelian Kaihe Roofing Engineering Co.,Ltd.	1 unit
68	ZheJiang Xihu (West Lake) Dis. Technology Co.,Ltd.	2 units
69	HangZhou Huagong CHINAMFG Electronics Co.,Ltd.	1 unit
70	HangZhou Oriental Environmental Engineering Research Institute Co.,Ltd.	2 units
71	HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd.	2 units
72	HangZhou Bochuang Environmental Protection Technology Co.,Ltd.	1 unit
73	ZheJiang Prime New Energy Technology Co.,Ltd.	3 units
74	Daiko International Trading (ZheJiang ) Co.,Ltd.	1 unit
75	ZheJiang Qiangxiong Construction Group Co.,Ltd.	3 units
76	HangZhou Kelen Commercial Equipment Co.,Ltd.	2 units
77	ZheJiang Bigo Electromechanical Equipment Co.,Ltd.	2 units
78	ZHangZhoug Qier Electromechanical Technology Co.,Ltd.	4 units
79	HangZhou Xihu (West Lake) Dis.deli Biotechnology Co.,Ltd.	3 units
80	ZheJiang Normal University	1 unit
81	Jumin Biotechnology Co.,Ltd.	3 units
82	HangZhou Sanfengqiao Foodstuffs Co.,Ltd.	3 units
83	HangZhou Jinji Strong Magnetic Co.,Ltd.	1 unit
84	ZheZheJiang di Industrial Co.,Ltd.	1 unit
85	Zhongtian Chaolong Technology Co.,Ltd.	3 units
86	ZheJiang WHangZhou Pharmaceutical Co.,Ltd.	1 unit
87	ZheJiang Hadajiang Liquor Liability Company	1 unit
88	Jacoby Environmental Materials Technology (ZheJiang ) Co.,Ltd.	5 units
89	HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.	1 unit
90	ZHangZhoug Province Mechanical and Electrical Design and Research Institute Co.,Ltd.	1 unit
91	HangZhou CHangZhou District Hengwei Machinery Trading Co.,Ltd.	1 unit
92	ZheJiang Jiao Tong University	2 units
93	Chang Xihu (West Lake) Dis. (Individual)	2 units
94	HangZhou Xihu (West Lake) Dis.wang Paper Co.,Ltd.	3 units
95	HangZhou CHINAMFG Mould Technology Co.,Ltd.	2 units
96	HangZhou Institute of Technology	1 unit

FAQ

[Q]: Are you a manufacturer or a trade company?
A : We are a factory, and we have our own factory in ZheJiang , we market our own products.

[Q]: What is your lead time?
A :Usually we will spend about 30 working days to make it.

[Q]: What is the shipping port?
A :ZheJiang ,HangZhou or HangZhou

[Q]: How can I get your quotation?
A : We will provide the quotation according to your request as soon as possible.
Before quotation, We would like to know:
1 you are end user or mid-buyer(agent, distributor,Supporting Enterprise or designing institute etc.)
2 if you are end user, what industry are you in?
3 have you bought such equipment before, what brand?
4Direction of use (where the compressor is used, what equipment it supplies)
5 What delivery volume, delivery pressure, whether frequency conversion, whether with after-treatment equipment do you want?
6 Have you ever heard about our brand:GESO

[Q]: What is your Quality assurance system?
A : ZheJiang Geso systems Industrial PLC is a wholly foreign-owned enterprise, and is also the authorized base for the production and assembly of screw compressors by BAE Systems in the UK. The company has passed ISO9001:2015 quality system certification of enterprises, ISO45001:2018 health and safety management system and ISO14001:2015 environmental management system and many other certifications. The company, from the chairman to every employee, has been trained in the world’s advanced quality system in order to obtain the induction certificate. Every year, we need to be reviewed and recognized by the certification body, and strictly in accordance with the certification system for each link in the strict day-to-day management of its products, procurement, inspection, testing, installation and commissioning of the whole machine are strictly in accordance with the ISO9001 program, to ensure that each compressor embodies the factory should be the quality and reliability of the company’s products with a high starting point, high-speed start, with a high reputation and high quality! The company’s products have a high starting point and high speed to start, with high reputation and high quality to win the trust of users from all walks of life. The company’s products to implement the 3 bags, 3 bags for 1 year. The company shall bear the replacement cost of parts, repair cost and transportation and miscellaneous cost of equipment round trip (except perishable parts such as 3 filters, lubricating oil and external auto-drainer) during the warranty period of the supplied equipments. If the rework or equipment damage is caused by our company’s drawings, data, technical documents errors or technical service personnel on-site guidance, our company is immediately responsible for free repair or replacement.

[Q]: What does your brand “GESO” mean?
A : Gas: Description of Geso products characterized as equipment for applications in the field of all types of gas processes.

Efficient: Design, innovation and development of a full range of products for the purpose of energy saving.

Stability: to ensure the user’s production safety and stability as a prerequisite requirement

OPTIMUM : to build a world-renowned brand of fluid machinery, and continue to become the industry leader in high-end energy-saving products.

Systems : the business philosophy centered on the praise of service customer experience. CHINAMFG provides compressors, after-treatment, pressure vessels, installation piping, intelligent cloud, air separation equipment and other series of products, providing users with one-stop product services; from pre-sales program design, installation of equipment during the sale, after-sales maintenance to create a full-system operation and service team.

Air Compressor Frequently Asked Questions

The following items are some of the most frequently asked air compressor questions and answers, courtesy of CHINAMFG systems.

How Does an Air Compressor Work?

An air compressor works by using electric power to create pressurized air that can then be released and converted to usable power for use in a number of applications, depending on your specific needs. It performs this by compressing air within a chamber by means of a piston, rotary vane or screw or scroll element and then releasing this pressurized air into your downstream receivers and distribution piping system.

How Do You Use an Air Compressor?

Follow these simple steps to use your air compressor safely and efficiently:

1. Check the oil level: For oil-filled compressors, check that the oil level reaches about ⅔ of the way up the dipstick.

2. Prepare the compressor: Attach hoses, plug into a grounded outlet, check the drain valve and flip the power switch.

3. Adjust the pressure regulator: Set the pressure to match the level your air tool requires.

4. Operate your device: The tank will refill as you use your tool.

5. Complete proper cleanup: Turn off the compressor to drain the pressure and open the air tank drain valve to clear out condensation.

What Does an Air Compressor Do?

Air compressors provide compressed air for applications such as filling gas cylinders with high-pressure clean air, providing pressurized clean air for operating pneumatic CHINAMFG systems or tools, filling tires and a wide variety of other applications across industries like automotive, medical, food and beverage, petroleum, pharmaceutical and more.

What Do You Use an Air Compressor For?

Air compressors can be used for many personal and professional applications. A few at-home uses include:

· Blowing up balloons

· Pumping up tires for bikes and vehicles

· Inflating pool accessories and air mattresses

· Refilling deflated sports equipment

· Pressure washing

· Powering tools for sanding, polishing and other types of crafting

· Painting with an airbrush or sprayer

Many businesses rely on air compressors to accomplish work safely and efficiently. Some industries that use compressors include:

· Agriculture

· Manufacturing

· Automobiles

· Pharmaceutical

· Food and beverage

· Dental and medical

· Construction

How Much Is an Air Compressor?

Air compressors can cost anywhere from $125 to $2,000. The price of an air compressor depends on many factors, including:

· PSI and CFM: Pounds per square inch (PSI) measures how much force an air compressor has, while cubic feet per minute (CFM) measures the flow.

· Duty cycle: This percentage indicates how long the compressor can provide air during a cycle.

· Life span: Compressors can last between 15,000 to 60,000 hours, depending on their use and size.

The type of compressor you need and how much you will pay for it will depend on your industry or personal needs.

How Often Do I Need to Change the Oil in My Air Compressor?

If you have a lubricated reciprocating, rotary screw or rotary vane air compressor, you’ll need to change the oil from time to time to keep it working properly. The recommended schedule is generally 3 months, subject to the manufacturer’s recommendation. For a rotary screw compressor, you’ll want to change the oil every 4,000 to 8,000 hours depending on the type of oil employed.

Do Air Compressors Run Out of Air?

If you run a regular duty cycle with an appropriate load, you will always have the air you need. As you use your tool, the pressure switch will detect the drop in pressure and start the compressor. Once the tank has refilled to the preselected pressure point, the compressor will shut off. The pressure switch will manage this function throughout the time you’re using an air tool.

If you attach a tool with an air requirement that is too great for the tank, you run the risk of emptying your air tank and having to wait for the compressor to refill it to a usable level. Always check your air compressor’s capabilities and your tool’s required pressure before connecting them.

Do I Need an Air Dryer in Addition to My Air Compressor?

It’s often a good value for you to add an air dryer to your air compressor system, as your air compressor can put a great deal of water into the compressed air system. Your air dryer could potentially remove gallons of water each day.

How Do I Control Contaminants in My Compressed Air System?

It’s important to have an effective air filtration system to keep your compressed air clean. CHINAMFG systems can provide you with all the air filters you need to help keep your compressed air clean.

How Often Do I Need to Replace My Air Intake Filter?

Air compressors with air intake filters need to be cleaned weekly. If your filter has built up so much debris that you can’t get it completely clean, or the filter is torn, you should replace it right away.

How Do I Control the Dew Point of My Compressed Air System?

If you’re worried about hitting the dew point, a quality air dryer should be the solution.

What Is the Correct Voltage for My Air Compressor?

Usually, 110 volts is sufficient for a small compressor. Larger compressors may take as much as 460 volts.

How Do I Drain the Water From My Tank?

You can drain your tank water manually or purchase an automatic drain valve to remove the water automatically. If water is becoming a big problem, consider investing in a more appropriately-sized air dryer.

What Is the Right Type of Hose for My Air Compressor?

It depends on the air compressor, but typically, they take a 1/4″ or 3/8″ hose. Your Geso systems professional can help you match the right hose to your compressor.

Do I Need a Reciprocating Compressor or a Rotary Screw Compressor?

For most applications, a reciprocating compressor is sufficient. If you need a compressor that runs continuously day and night, you need a rotary screw compressor.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Mute:	Mute
Impeller:	Closed
Cooling System:	Water Cooling
Lubrication Style:	Oil-Free
Material:	Cast Iron
Type:	Multiaxial Type

Customization:	Available \|

air compressor

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:

Water Quality:

Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.

Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.

air compressor

Are There Any Restrictions on the Type of Water Used in Water-Lubricated Compressors?

When it comes to water-lubricated compressors, there are certain restrictions and considerations regarding the type of water that can be used. Here’s a detailed explanation of the restrictions on the type of water used in water-lubricated compressors:

Water Quality:

Cleanliness: The water used in water-lubricated compressors should be clean and free from excessive impurities or contaminants. Impurities like sediment, minerals, or debris can cause blockages, wear, or damage to the compressor components. It is important to use water that meets the cleanliness requirements specified by the manufacturer.
Chemical Composition: The chemical composition of the water can also be a factor to consider. Water with high mineral content or hardness can lead to scale formation, which can affect the performance and lifespan of the compressor. Water treatment methods, such as water softening or filtration, may be necessary to maintain the desired water quality.

Water Temperature:

Freezing Point: In cold climates, it is important to ensure that the water used in the compressor’s lubrication system does not freeze. Freezing can cause operational issues and damage to the equipment. The water temperature should be maintained above freezing point through insulation, heating, or other suitable methods.
Temperature Range: Water-lubricated compressors may have specific temperature requirements to ensure optimal operation and lubrication. Operating the compressor with water temperatures outside the recommended range can affect its performance and lifespan. It is important to adhere to the manufacturer’s guidelines regarding the acceptable temperature range for the water used.

Water Treatment:

Water Treatment Systems: Depending on the quality of the available water supply, it may be necessary to use water treatment systems to ensure the water meets the required standards. Water treatment systems can help remove impurities, control chemical composition, and maintain the desired water quality for effective lubrication and cooling.
Water Treatment Frequency: Regular maintenance and monitoring of the water treatment systems are essential to ensure their effectiveness. The frequency of water treatment, such as filtration or chemical treatment, may vary depending on the specific conditions and the water quality in the area.

Manufacturer Recommendations:

Consulting the Manufacturer: It is important to consult the manufacturer’s guidelines and recommendations regarding the type of water to be used in water-lubricated compressors. Manufacturers may specify the acceptable water quality parameters, treatment methods, or restrictions to ensure optimal performance and longevity of the compressor.

By considering the cleanliness, chemical composition, temperature, and appropriate water treatment measures, the type of water used in water-lubricated compressors can be optimized to meet the requirements specified by the manufacturer. Adhering to these restrictions helps ensure efficient and reliable operation of the compressor while minimizing the risk of component damage or performance issues.

air compressor

Advantages of Using Water as a Lubricant in Air Compressors

Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:

Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.

Overall, using water as a lubricant in air compressors can offer significant advantages in terms of cost-effectiveness, environmental friendliness, heat dissipation, fire safety, and maintenance requirements.

China factory 0.6-25 Kg/Cm2 15bar Oil Free Turbo Centrifugal Air Compressor mini air compressor
editor by CX 2024-05-16

China manufacturer 2-25 Bar Heavy Industrial Oil Free Centrifugal Air Compressor For Sale mini air compressor

Product Description

Centrifugal Compressor Core Technology

Performance advantages of centrifugal Compressor:

Customized coolers are suitable for various working conditions and they are easy for cleaning and maintenance.

Three operating modes can be realized by the control system: full constant pressure mode, automatic dual mode and self-balancing mode. It can intelligently adjust according to the actual operation conditions and gas demand to ensure that the equipment is always in a state of high efficiency, energy saving and stable operation.

Anti-surge control system avoids costly damage to the machine and production loss due to process interruption.
Variable speed drive solution reduces the sudden current demand during the starting process of the centrifugal compressors. This avoids the voltage dips and other undesirable effects, especially when your power supply is limited.

The centrifugal compressors were granted certificates of conformity with compressed air purity class for total oil 0, tested according to ISO 8573-1, which prevents oil from polluting your process system.

Efficient impeller and stage design for excellent specific energy requirement (SER). It helps lower your electric bills significantly and has a positive impact on the environment.

DAC50-DAC3000
Model	Maximum	Capacity FAD* (m3/min)	Installed motor power		Dimensions(mm)			Weight
Model	working pressure(barg)	Capacity FAD* (m3/min)	kW	hp	L	W	H	kg
DAC50	0.6-8	25-48	132-263	175-350	2650	1650	1850	3860
DAC80	0.6-10	40-85	225-450	300-600	3350	1860	2150	6500
DAC120	0.6-13	75-123	400-630	535-850	3850	2100	2250	8250
DAC200	0.6-13	115-208	618-1120	830-1120	4250	2150	2350	11500
DAC250	0.6-20	175-260	925-1375	1250-1850	4500	2250	2380	16000
DAC300	0.6-25	228-310	1225-1600	1650-2200	4650	2250	2450	17500
DAC350	0.6-25	283-360	1500-1850	2000-2500	4850	2250	2500	18500
DAC450	0.6-25	350-460	1800-2350	2400-3150	5250	2300	2950	21500
DAC550	0.6-25	430-586	2250-3150	3000-4200	6250	4550	3550	41500
DAC1000	0.6-25	550-1015	2850-5000	3800-5750	8350	3850	3850	45500
DAC1500	0.6-25	920-1650	4500-7850	6000-10500	12500	5150	4550	62500
DAC3000	0.6-25	1680-3000	7980-14500	10800-20000	14500	5850	5350	78500
Turbocharger series
Model	Inlet pressure(barg)	Capacity FAD* (m3/min)	Outlet pressure(barg)	Installed	Dimensions(mm)			Weight
				motor	Dimensions(mm)			Weight
				power(kW)	L	W	H	kg
DAC550-HB	0.3-1.0	436-586	16-50	1214-1758	5250	3250	2850	25000
DAC1000-HB	0.3-1.0	550-1571	16-50	1925-3570	5850	3550	3150	32500
DAC1500-HB	0.3-1.0	920-1650	16-50	3220-5775	6500	4350	3550	42500
DAC3000-HB	0.3-1.0	1680-3000	16-50	5880-10500	7500	5350	4250	58500

Q : How Many Staff Are There In The DENAIR Group?
A : About 588.

Q : How Many Employees Do You Have In Your Factory?
A : About 100.

Q : How Many Staff Do You Have In your International Department?
A : 40.We Have Sales Representatives Who Can Speak English, French, Russian, Spanish, and Arabic.

Q : What’s your factory’s production capacity?
A : About 500 units per month.

Q : What’s Our Factory’s Production Capacity?
A : About 500 Units Per Month

Q : What’s The Annual Sales Volume Of The DENAIR Group?
A : About USD 52,000,000.00 In 2017.With An Annual Growth Rate Of 33%.

Q : What’s The Annual Sales Volume Of Your International Department?
A : About USD 16,000,000.00 In 2017, 30% Of The Group Annual Sales.

Q:How Many Units Does DENAIR Export In A Month?
A: About 80 To 100 Units.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Mute:	Mute
Impeller:	Closed
Cooling System:	Water Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water Quality:

Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

air compressor

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

When encountering common problems with water-lubrication systems, it is essential to follow a systematic troubleshooting approach. Here’s a detailed explanation of the steps involved in troubleshooting common issues with water-lubrication systems:

Step 1: Identify the Problem:

The first step is to identify the specific problem or symptom that is affecting the water-lubrication system. Common problems may include inadequate lubrication, water leaks, abnormal noises, or reduced system performance. Understanding the specific issue will help in determining the appropriate troubleshooting steps.

Step 2: Check Water Supply:

Verify that there is a proper water supply to the system. Ensure that the water source is connected and flowing adequately. Check for any obstructions or restrictions in the water lines that may be affecting the water flow to the lubrication system.

Step 3: Inspect Water Filters and Strainers:

Water filters and strainers are used in water-lubrication systems to remove debris and impurities from the water. Inspect these filters and strainers for clogs or blockages that may be hindering the water flow. Clean or replace the filters as necessary to ensure proper water filtration.

Step 4: Verify Water Pressure:

Check the water pressure within the system to ensure it falls within the recommended range. Low water pressure can result in inadequate lubrication, while high water pressure can cause leaks or damage to the system. Use a pressure gauge to measure the water pressure and adjust it if necessary according to the manufacturer’s guidelines.

Step 5: Examine Water-Lubrication Components:

Closely inspect the various components of the water-lubrication system, including the water pump, distribution lines, lubrication points, and seals. Look for signs of wear, damage, or misalignment that may be contributing to the problem. Tighten loose connections and replace any damaged or worn-out components as needed.

Step 6: Check for Air in the System:

Air trapped within the water-lubrication system can affect its performance. Bleed the system to remove any trapped air. Follow the manufacturer’s instructions for bleeding air from the system, which typically involves opening specific valves or vents until a steady flow of water is achieved.

Step 7: Inspect Cooling Mechanisms:

Water-lubrication systems often incorporate cooling mechanisms, such as heat exchangers or radiators, to dissipate excess heat. Inspect these cooling components for blockages, corrosion, or leaks that may be compromising their effectiveness. Clean or repair the cooling mechanisms as necessary to ensure proper heat dissipation.

Step 8: Consult Manufacturer Documentation:

If the troubleshooting steps above do not resolve the problem, refer to the manufacturer’s documentation, such as the user manual or technical specifications. These resources may provide specific troubleshooting guidelines, diagnostics, or additional maintenance procedures for the water-lubrication system.

Step 9: Seek Professional Assistance:

If the problem persists or if the troubleshooting steps are beyond your expertise, it is advisable to seek professional assistance. Contact the manufacturer’s technical support or consult a qualified technician with experience in water-lubrication systems. They can provide expert guidance and assistance in resolving complex issues.

By following these troubleshooting steps, you can effectively identify and address common problems encountered in water-lubrication systems, ensuring optimal performance and reliability.

air compressor

Advantages of Using Water as a Lubricant in Air Compressors

Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:

Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.

China manufacturer 2-25 Bar Heavy Industrial Oil Free Centrifugal Air Compressor For Sale mini air compressor
editor by CX 2024-05-08

China Custom High Capacity Low Noise 300kw 50Hz Oil-Free AC Power Electric High Speed Centrifugal Air Compressor for Industry manufacturer

Product Description

1. China-Japan latest technology cooperation, high reliability.

2. Oil Cooling Permanent Magnetic Motor.
3. IP65 protection grade & heavy duty air filter, suitable for high dusty environment.
4. IE4 Efficiency motor efficiency.
5. Most energy saving mode, Only work at loading.
6. Wide frequency range 25%-100%.
7. Premium Magnetic material resist more than 180ºC temp.
8. Reliable PM motor supplier from Italy.
9. Direct Taper connection, no transmission power loss, easy maintenance.
10.Touch Screen PLC with preset running schedule, more intelligent control.
11. Both main motor and fan motor are inverter control, more accurate control.
12. Easy for installation and service.
13. Fantastic Energy Saving, save up to more than 30-40%.

After-sales Service	Engineers available to service overseas
OEM	Welcomed (we have 5professional R&D engineers to do design & customizing service according to client’s different requirement)

Application

Packaging & Shipping

FAQ

1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

2.why should you buy from us not from other suppliers?
Responsibility, high quality, on time delivery

3. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,FCA,DDP,DDU,Express Delivery,DAF;
Accepted Payment Currency:USD,EUR,AUD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union;
Language Spoken:English,Chinese

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	18 Mounth
Warranty:	18 Mounth
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What Are the Key Components of a Water-Lubrication System in Compressors?

A water-lubrication system in compressors typically consists of several key components that work together to provide lubrication and cooling to the compressor. Here’s a detailed explanation of the key components of a water-lubrication system in compressors:

Water Supply:

Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

Regular maintenance, inspection, and monitoring of the key components of the water-lubrication system are essential to ensure its proper functioning and to prevent any issues that could affect the performance and longevity of the compressor.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

How does a water lubrication system work in air compressors?

A water lubrication system in air compressors is designed to provide lubrication and cooling to the internal components of the compressor using water as the lubricant. This system offers an alternative to traditional oil lubrication systems and has specific advantages in certain applications. Here’s a detailed explanation of how a water lubrication system works in air compressors:

1. Water Injection:

In a water lubrication system, a controlled amount of water is injected into the compression chamber of the air compressor. This can be achieved through various methods, such as direct injection or atomization of water droplets.

2. Lubrication:

As the compressed air is generated, the injected water serves as a lubricant for the internal components of the compressor. The water forms a thin film on the surfaces, reducing friction and wear between the moving parts. This lubrication helps to improve the efficiency and lifespan of the compressor.

3. Cooling:

The water injected into the compression chamber also acts as a cooling medium. As the air is compressed, heat is generated, and the injected water absorbs some of this heat. The water carries away the heat, preventing excessive temperature rise and maintaining optimal operating conditions for the compressor.

4. Separation and Filtration:

After serving its lubrication and cooling purposes, the water needs to be separated from the compressed air. The compressed air and water mixture pass through a separator or filtration system, which separates the water from the compressed air. This can involve mechanisms such as centrifugal force, gravity separation, or filtration media.

5. Water Treatment:

In water lubrication systems, proper water treatment is essential to maintain the quality and performance of the system. Water filtration and purification processes are employed to remove impurities, contaminants, and any solid particles present in the water. This ensures that the injected water is clean and free from any substances that could potentially harm the compressor or the downstream air system.

6. Recirculation or Discharge:

Depending on the specific design of the water lubrication system, the separated water can be recirculated back into the system for reuse or discharged from the compressor. Recirculation systems involve the treatment and filtration of the water before reintroducing it into the compression chamber. Discharge systems, on the other hand, may involve further treatment or disposal of the water in an environmentally responsible manner.

By utilizing a water lubrication system, air compressors can benefit from reduced oil consumption, improved air quality, and enhanced energy efficiency. These systems are commonly employed in industries where oil contamination must be avoided, such as food processing, pharmaceutical manufacturing, and electronics production.

China Custom High Capacity Low Noise 300kw 50Hz Oil-Free AC Power Electric High Speed Centrifugal Air Compressor for Industry manufacturer
editor by CX 2024-05-03

China wholesaler High Efficiency Air Compressor Oil-Free Centrifugal for Hydrogen Fuel Cell Bop 10kw 30kw 60kw 90kw 100kw 120kw 150kw Fuel Cell air compressor parts

Product Description

Pressurized oil-free centrifugal air compressor

The fuel cell air compressor is mainly used in the fuel cell air circuit to compress the external gas to obtain a suitable inlet pressure and flow rate for the operation of the stack.Oil free air compressors have the following advantages:
1. The oil-free air compressor adopts small cylinders, with a smaller volume and more compact structure;
2. The oil-free air compressor has excellent balance performance and does not require too many parts;
3. Low vibration, but high operating efficiency;
4. The oil-free silent design is used in the design of oil-free air compressors, which will not produce excessive noise during long-term operation;
5. Unmanned duty can be achieved during the work process;
6. The design of oil-free air compressors intentionally avoids excessive components, so they do not require a lot of manpower and material resources for maintenance and upkeep.

Product Parameters

Pressurized oil-free centrifugal air compressor

model	XT-FCC160	XT-FCC300	XT-FCC300S	XT-FCC300P
Rated pressure Ratio(PR)	2.5	2.5	2.5	2.8
Flow (g/s)	58	108	108	97
Air compressor rated power( KW)	9	<15	<15	15.94
Matching system power (KW)	30-50	50-100	50-100	50-100
Intakeair temperature ºC	-30-45ºC	-30-45ºC	-30-45ºC	-30-45ºC
voltage ( VDC)	450-750	450-750	450-750	450-750
Start/stop Life (times)	>100000	>100000	>100000	>100000

Company Profile

Sinopower was established in 2011. We supply various products in the hydrogen energy industry chain, including but not limited to hydrogen production, hydrogen storage, hydrogen supply, electric maintenance and BOP parts, fuel cell system assemblies, fuel cell vehicles, etc.

We have an experienced professional technology research and development team, which can provide professional services from product selection and matching, system design, product customization and development and technical support. We work with CHINAMFG universities and scientific research institutions at home and abroad, such as the University of Science and Technology of China, the University of Auckland, HangZhou University, HangZhou University of Technology, Sun Yat-sen University, etc, The first hydrogen fuel cell forklift has been developed for the domestic leading forklift enterprise CHINAMFG Forklift.

At the same time, our stack, fuel cell system, hydrogen bicycle/scooter, hydrogen UAV and hydrogen production equipment are exported to dozens of countries and regions such as the United States, the Netherlands, Italy, Germany, South Korea, India and Malaysia.

Packaging & Shipping

The packaging of the items is strong and intact, avoiding breakage, leakage, and loss during the shipping process; avoiding damage to the internal items caused by external climate changes.Customize packaging according to the actual product to ensure that the product arrives at the customer’s designated place without damage.

Our Advantages

Using Scenarios
The product is mainly used as a small power generation device, can be used for sea, land wind and wind direction observation power supply, mountain area, sea meteorological observation power supply, engineering guide electric and optical display board power supply, river water quality survey power supply, emergency backup power supply of parking lot, unmanned monitoring power supply, parking lot collection equipment backup power supply, RV power supply and so on.

FAQ

1. who are we?
We are based in ZheJiang , China, start from 2011,sell to Southeast Asia,North America,Eastern Europe,South Asia.

2.Can you customize the rated power or voltage?
Yes, customizing products is acceptable.

3.Can your company provide whole system(fuel cell, Hydrogen production, hydrogen storage, hydrogen supply system)?
Yes, we can provide necessary accessories accordingly.

4. why should you buy from us not from other suppliers?
We have an experienced professional technical research and development team. Control system matching ability/R&D and quality control ability. Price advantage brought by supply chain integration capabilities.

5.What is your terms of payment?
We accept payment by Paypal, Alibaba, T/T, L/C,etc.. for bulk order, we charge 50% before production and remaining balance payment before shipment.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Available
Warranty:	1year
Installation Type:	Stationary Type

Samples:	US$ 1000/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

By following these practices, you can ensure proper water lubrication in air compressors, promoting efficient operation, minimizing wear and tear, and extending the lifespan of the equipment. Regular monitoring, maintenance, and adherence to manufacturer guidelines are crucial to optimize water lubrication and overall compressor performance.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

Overall, water-lubricated air compressors play a significant role in various automotive applications, including tire inflation, painting and finishing, brake and suspension systems, and diagnostic and testing equipment. Their use helps ensure efficient and reliable operation, improved productivity, and high-quality results in automotive service, repair, and manufacturing processes.

air compressor

Are Water Lubrication Air Compressors More Environmentally Friendly?

Water lubrication in air compressors offers several environmental benefits compared to traditional lubrication methods. Here are some reasons why water lubrication is considered more environmentally friendly:

Non-toxic and biodegradable: Water is a natural substance that is non-toxic and biodegradable. It does not contain harmful chemicals or additives that can pollute the air or water systems. When water lubricants are used in air compressors, there is a reduced risk of environmental contamination.
Reduced air pollution: Traditional lubricants, such as oils or synthetic lubricants, can release volatile organic compounds (VOCs) into the air during operation. VOCs contribute to air pollution and can have detrimental effects on human health and the environment. Water lubrication eliminates the release of VOCs, resulting in improved air quality and reduced air pollution.
Minimized water pollution: Water lubrication does not introduce additional pollutants into water systems. Unlike oils or synthetic lubricants, water does not leave behind harmful residues or contaminants that can contaminate water sources. This helps to protect aquatic ecosystems and maintain water quality.
Energy efficiency: Water lubrication can contribute to energy efficiency in air compressors. Water has excellent heat transfer properties, allowing for efficient dissipation of heat generated during compressor operation. By effectively managing heat, water lubrication helps to reduce energy consumption and improve overall compressor efficiency.
Sustainable resource: Water is a renewable resource that is readily available in nature. Unlike oil or synthetic lubricants, which require extraction and processing, water can be sourced sustainably. This reduces the reliance on finite resources and promotes a more sustainable approach to lubrication in air compressors.

Overall, water lubrication in air compressors is considered more environmentally friendly due to its non-toxic nature, reduced air and water pollution, energy efficiency, and sustainable resource usage.

China wholesaler High Efficiency Air Compressor Oil-Free Centrifugal for Hydrogen Fuel Cell Bop 10kw 30kw 60kw 90kw 100kw 120kw 150kw Fuel Cell air compressor parts
editor by CX 2024-03-29

China Standard Oil-Free High-Speed Drive Centrifugal Air Compressor For Medical arb air compressor

Product Description

Centrifugal Compressor Core Technology

Performance advantages of centrifugal Compressor:

Customized coolers are suitable for various working conditions and they are easy for cleaning and maintenance.

Efficient impeller and stage design for excellent specific energy requirement (SER). It helps lower your electric bills significantly and has a positive impact on the environment.

DAC50-DAC3000
Model	Maximum	Capacity FAD* (m3/min)	Installed motor power		Dimensions(mm)			Weight
Model	working pressure(barg)	Capacity FAD* (m3/min)	kW	hp	L	W	H	kg
DAC50	0.6-8	25-48	132-263	175-350	2650	1650	1850	3860
DAC80	0.6-10	40-85	225-450	300-600	3350	1860	2150	6500
DAC120	0.6-13	75-123	400-630	535-850	3850	2100	2250	8250
DAC200	0.6-13	115-208	618-1120	830-1120	4250	2150	2350	11500
DAC250	0.6-20	175-260	925-1375	1250-1850	4500	2250	2380	16000
DAC300	0.6-25	228-310	1225-1600	1650-2200	4650	2250	2450	17500
DAC350	0.6-25	283-360	1500-1850	2000-2500	4850	2250	2500	18500
DAC450	0.6-25	350-460	1800-2350	2400-3150	5250	2300	2950	21500
DAC550	0.6-25	430-586	2250-3150	3000-4200	6250	4550	3550	41500
DAC1000	0.6-25	550-1015	2850-5000	3800-5750	8350	3850	3850	45500
DAC1500	0.6-25	920-1650	4500-7850	6000-10500	12500	5150	4550	62500
DAC3000	0.6-25	1680-3000	7980-14500	10800-20000	14500	5850	5350	78500
Turbocharger series
Model	Inlet pressure(barg)	Capacity FAD* (m3/min)	Outlet pressure(barg)	Installed	Dimensions(mm)			Weight
				motor	Dimensions(mm)			Weight
				power(kW)	L	W	H	kg
DAC550-HB	0.3-1.0	436-586	16-50	1214-1758	5250	3250	2850	25000
DAC1000-HB	0.3-1.0	550-1571	16-50	1925-3570	5850	3550	3150	32500
DAC1500-HB	0.3-1.0	920-1650	16-50	3220-5775	6500	4350	3550	42500
DAC3000-HB	0.3-1.0	1680-3000	16-50	5880-10500	7500	5350	4250	58500